0
0

POF Drop-In Single-Stage Curved Trigger 4.5 lb (AR-15)

UPC: 847313004574

$180.00

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Swapping out a gritty mil-spec fire control group is one of the fastest ways to make an AR feel like a completely different rifle, and this POF Drop-In trigger does exactly that. It comes to you fully assembled inside a self-contained aluminum housing, so there's no fiddling with loose springs, disconnectors, or hammers. You knock out your factory pins, set the cassette in the pocket, run the pins back through, and you're shooting. Most people have this done in well under fifteen minutes with basic tools.

What Makes the POF Drop-In 4.5 lb Trigger Tick

The pull weight is a fixed 4.5 pounds, single-stage and non-adjustable, which a lot of folks actually prefer. There's no set screw to back out or re-tune down the road, just the same clean break every time you press it. The trigger, disconnector, and hammer are all cut from American A2 steel and nitride heat-treated to 70 Rockwell case hardness, so these are seriously tough internals built to shrug off wear and corrosion over the long haul. That 4.5 lb weight lands in a sweet spot that works for range plinking, competition, hunting, and general-purpose use without feeling dangerously light.

Housing, Feet, and the Included KNS Pins

The curved trigger shoe sits inside POF's signature red hard-coat anodized aluminum housing, and the whole unit rides on rubber urethane feet that hold it snug in the receiver pocket to eliminate rattle and slop. POF also throws in a set of stainless steel KNS Precision anti-walk pins that fit both standard AR lowers and POF's own ambidextrous lowers, so you're not hunting down extra hardware to lock everything in place.

Fitment Notes for the POF Curved Drop-In

This unit is built for semi-auto mil-spec AR-15 and AR-10 lowers using standard trigger and hammer pin spacing. It is not made for 9mm PCC blowback carbines, DPMS 308 lowers with straight trigger guards, or Sig 716 lowers, so double check your platform before ordering if you're running anything unusual. On a standard mil-spec lower it's about as plug-and-play as trigger upgrades get.

Key Specifications

  • Manufacturer: Patriot Ordnance Factory (POF-USA)
  • Manufacturer Part Number: 00457
  • UPC: 847313004574
  • Model: Drop-In
  • Trigger Type: Single-Stage, Non-Adjustable
  • Pull Weight: 4.5 lb
  • Trigger Shoe Style: Curved
  • Internal Material: American A2 Steel, Nitride Heat-Treated to 70 Rockwell
  • Housing: Red Hard-Coat Anodized Aluminum with Rubber Urethane Feet
  • Pins: Stainless Steel KNS Precision Anti-Walk Pins
  • Platform: Mil-Spec AR-15 / AR-10
  • Length: 7.3 in

What’s Included

  • POF Drop-In Single-Stage Curved Trigger (pre-assembled cassette)
  • Stainless steel KNS Precision anti-walk pins (fits standard AR and POF ambidextrous lowers)

Frequently Asked Questions

Is the POF Drop-In trigger hard to install?

Not at all. Because it ships as a pre-assembled cassette, you just remove your factory fire control group, drop the unit into the trigger pocket, and secure it with the included KNS anti-walk pins. Most people finish the job in under fifteen minutes with basic punches and a bit of patience.

Can I adjust the pull weight on this POF trigger?

No, this is a fixed 4.5 lb single-stage trigger with no adjustment. A lot of folks see that as a plus since there's no set screw to loosen over time and the break stays consistent shot after shot. If you want a lighter or heavier option, POF offers the same drop-in in other weights.

Will the POF Drop-In trigger fit my rifle?

It's designed for semi-auto mil-spec AR-15 and AR-10 lowers with standard trigger and hammer pin spacing. It is not meant for 9mm PCC blowback carbines, DPMS 308 lowers with straight trigger guards, or Sig 716 lowers. If you're on a common mil-spec lower, you're good to go.

Why choose a drop-in trigger over a mil-spec fire control group?

A drop-in unit like this one gives you a cleaner break, shorter reset, and much easier installation than piecing together individual springs and pins. The shorter, more positive reset lets you get back on target faster for quick follow-up shots. The A2 steel internals and nitride heat-treat also mean it holds its feel far longer than a gritty factory setup.

Additional information

UPC

847313004574

Manufacturer

Manufacturer Part Number

00457

Length

7.3

Model

Package Height

0.9

Package Width

5.1

Product Type

Trigger

Shipping Weight

0.25

Style

Curved

Reviews

There are no reviews yet.

Be the first to review “POF Drop-In Single-Stage Curved Trigger 4.5 lb (AR-15)”