$27.00
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you want to put a scope or red dot on your Remington autoloader, you need a base that won't budge, and this EGW 0 MOA Picatinny rail delivers exactly that. It's a one-piece design machined from extruded 6061 T6 aluminum and finished in matte black anodizing, so it shrugs off recoil and holds zero round after round. The full-length Picatinny cross-slots give you plenty of room to slide rings fore and aft, which makes dialing in your eye relief simple no matter what optic you're running.
This rail is cut specifically for the 12 gauge Remington receiver pattern, covering the 1100, 11-87, V3, and Versa Max. It mounts directly to the factory drilled and tapped holes on the receiver, so there's no gunsmithing required if your gun already has them. Most V3 and Versa Max shotguns leave the factory drilled and tapped, while older 1100 and 11-87 guns may need to be checked first. The slots are gauged to MIL-STD 1913 specs, so your rings and accessories seat the way they should.
The 0 MOA spec means the rail sits flat with zero built-in elevation cant, which is what you want for close to mid-range shotgun work like slug hunting, turkey setups, and 3-gun. A milled center channel trims weight without giving up rigidity, so you're not adding a bunch of heft up top. It accepts both Picatinny and Weaver style rings, which keeps your options wide open when it comes to mounting a scope, red dot, or holographic sight.
EGW builds these right here in the USA, and the attention to machining shows once you have it in hand. Toss on a set of rings and you've got a dependable optics platform ready for the field or the range.
It installs directly to the factory drilled and tapped holes on the receiver, and most V3 and Versa Max shotguns come drilled and tapped from the factory. If your gun already has those four holes, it's a simple bolt-on job with the included screws and T-10 bit. Older 1100 and 11-87 guns should be checked for the holes before ordering.
A 0 MOA rail sits flat with no built-in elevation angle. That's the right choice for the close to mid-range work shotguns are typically used for, like slug hunting, turkey loads, and 3-gun competition. If you were reaching way out at distance you might want a canted rail, but for shotgun duty 0 MOA keeps your optic's adjustment range centered.
Yes. The cross-slots are cut to MIL-STD 1913 Picatinny spec, and that pattern accepts both Picatinny and Weaver style rings. That gives you plenty of flexibility to mount a scope, red dot, or holographic sight with whatever rings you prefer.
This mount is cut for the standard 12 gauge receiver radius. A 20 gauge receiver is smaller, so the rail won't sit flush against it. Stick with a 12 gauge 1100, 11-87, V3, or Versa Max for a proper fit.
| UPC | 841370105311 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 40801 |
| Color | Black |
| Length | 8.2500 |
| Model | |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.