0
0

BCM KAG Angled Grip Gray – Picatinny 1913 Handstop Foregrip

UPC: 812526020260

$19.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The BCMGunfighter KAG (Kinesthetic Angled Grip) came out of a collaboration between Bravo Company and Travis Haley, and it fills that sweet spot between a full vertical grip and a bare handguard. Instead of adding a bulky grip that gets in the way, the KAG uses a forward rake that puts your hand in a natural, repeatable spot every time. That angle takes the strain off your wrist, elbow, and shoulder when you're running a modern C-clamp hold, and it does it without fattening up your handguard. This one comes in wolf gray to match a lot of popular builds.

What the KAG Angled Grip Does on the Rail

Think of it as an index point more than a grip you wrap your whole hand around. The low profile means you always know where your support hand lands, which pays off during target-to-target transitions and when you're bracing against a barricade or shooting off a support. Both the front and back faces are textured, so you get positive engagement whether you're pulling the gun into your shoulder or pushing forward. Folks who run a thumb-over-bore grip tend to love how it fits that style, and it doubles as a rest for supported firing positions.

Mounting the BCM KAG Picatinny Handstop

This is the 1913 Picatinny version, so it clamps directly onto any standard Pic rail section, typically along the bottom of your handguard. BCM went with a patent-pending direct-mount anchor system instead of the usual screw-and-backing-nut setup. It spreads clamping force across the accessory for a rigid, no-wiggle hold with minimal hardware. Install is quick with a T15 Torx driver (not included): snug it to roughly 18 to 20 inch-pounds plus a quarter turn, and check that there's no play once it's tightened.

Built in the USA from high-quality impact-resistant polymer, the KAG is light, tough, and about the least fussy upgrade you can throw on a build. If you've been on the fence between a vertical grip and a plain handstop, this splits the difference nicely.

Key Specifications

  • Manufacturer: Bravo Company Mfg / BCM
  • Model: BCMGunfighter KAG (Kinesthetic Angled Grip)
  • Manufacturer Part Number: BCM-KAG-1913-WG
  • UPC: 812526020260
  • Color: Wolf Gray
  • Mounting Interface: Picatinny 1913 Rail
  • Material: Impact-Resistant Polymer
  • Type: Angled Foregrip / Handstop
  • Texture: Front and Back
  • Tool Required: T15 Torx Driver (not included)
  • Recommended Torque: 18-20 in-lbs plus quarter turn
  • Origin: Made in the USA

What’s Included

  • BCM KAG Kinesthetic Angled Grip (Picatinny 1913, Wolf Gray)
  • Integrated direct-mount anchor hardware

Frequently Asked Questions

What rail does the BCM KAG angled grip fit?

This is the 1913 Picatinny version, so it mounts directly to any standard Picatinny rail section. Most folks run it along the bottom rail of the handguard. If your setup uses M-LOK or KeyMod instead, you'll want the version made for that interface.

Do I need any tools to install the KAG handstop?

Yes, you'll need a T15 Torx driver, which is not included in the box. Installation is quick: extend the anchor, slide the grip into place on the rail, engage the recoil lug, and tighten to about 18 to 20 inch-pounds plus a quarter turn. Just be careful not to over-tighten it.

Is the BCM KAG a full grip or more of a handstop?

It's really a low-profile hybrid. The forward rake gives you the wrist relief and index point of an angled grip, but the small profile makes it work like a handstop without the bulk of a vertical grip. It's a popular pick for anyone running a C-clamp thumb-over-bore hold.

Will the wolf gray color match my rifle?

Wolf gray is a versatile mid-tone that plays well with black, FDE, and other gray builds. It's the same durable impact-resistant polymer as the other KAG colors, just in a shade that helps break up an all-black look or blend into a two-tone rifle.

Additional information

UPC

812526020260

Manufacturer

Manufacturer Part Number

BCM-KAG-1913-WG

Color

Gray

Length

6.9500

Reviews

There are no reviews yet.

Be the first to review “BCM KAG Angled Grip Gray – Picatinny 1913 Handstop Foregrip”