Description
Adding a quick-detach sling point to an AR is one of those upgrades that sounds simple until you run into the problem every flat QD end plate has: the swivel spins right into the buffer tube and the whole rifle hangs at a weird angle. Phase 5 fixed that with the Sloped QD End Plate. Instead of sitting flush against the receiver, the QD socket is set at a 30-degree angle that kicks the swivel out and away from the tube, giving your sling a clean, full 360-degree rotation whether you shoot right or left handed.
What Makes the Sloped QD End Plate Different
The angle is the whole story here. By pushing the mount off to the side, the sling attachment stops fighting the buffer tube during transitions and reslinging, which means fewer snags and a more natural carry position. It accepts any push-button QD swivel and standard QD slings, so whatever you already have in the range bag will drop right in.
Built From 7075-T6 Billet
This isn't a cheap stamped part. The Sloped QD End Plate is CNC-machined from 7075-T6 billet aluminum, which runs roughly 80 percent stronger than the more common 6061 and comes in lighter than the stamped steel end plate it replaces at about 0.39 ounces. It carries a 200-pound pull rating, so the QD point holds up to hard, real-world use, and the hardcoat anodized finish keeps corrosion and wear off it in any weather.
Fitment and Install
Installation is straightforward for anyone who has been inside a lower before. It uses your standard AR15/M4 carbine castle nut (not included) and fits mil-spec carbine receiver extensions, commercial-spec tubes, and Phase 5's own pistol buffer tubes across most AR15, M4, and .308 AR variant lowers. If you're already pulling the castle nut for a stock swap, this is the perfect time to drop one in and be done with the sling headache for good.
Key Specifications
- Manufacturer: Phase 5 Weapon Systems
- Model: Sloped Quick Disconnect End Plate
- MPN: SQD-EP
- UPC: 813318022226
- Color: Black
- Finish: Hardcoat Anodized
- Material: 7075-T6 Billet Aluminum
- Weight: 0.39 oz
- Mount Angle: 30 Degrees
- Rotation: 360 Degrees Ambidextrous
- Pull Force Rating: 200 lbs
- Mount Type: Push-Button QD Swivel
- Platform Fit: AR-15 / M4 / .308 AR Variants
- Compatibility: Mil-Spec & Commercial Carbine Receiver Extensions
- Made In: USA
What’s Included
- Phase 5 Sloped QD End Plate (Black)
Frequently Asked Questions
Does the Sloped QD End Plate come with a castle nut?
No, the castle nut is not included. It uses your standard AR15/M4 carbine lower receiver extension castle nut, so if you're reusing the one already on your rifle you're good to go. If you're building from scratch, plan to source a castle nut separately.
Why is the QD mount angled instead of flat?
The 30-degree slope pushes the sling swivel out and away from the buffer tube. That solves the classic problem with flat QD end plates where the swivel binds against the tube and the rifle hangs at an awkward angle. The angle gives you a full 360-degree rotation for clean carry and easy transitions with either hand.
Will this fit my AR pistol or .308 build?
It's compatible with mil-spec carbine receiver extensions, commercial-spec tubes, and Phase 5's own pistol buffer tubes across most AR15, M4, and .308 AR variant lowers. As long as your buffer tube uses a standard end plate and castle nut setup, this will drop right in.
How strong is the QD point on this end plate?
It's machined from 7075-T6 billet aluminum, which is roughly 80 percent stronger than the 6061 aluminum used in a lot of parts. The QD mount carries a 200-pound pull rating, so it holds up to slinging, reslinging, and hard field use without worry.







Reviews
There are no reviews yet.