Description
The Phase 5 FATman Hex Brake was built to solve the same headaches competition and precision AR-15 shooters have been fighting for years: recoil that throws off your sight picture and muzzle rise that slows down your next shot. It runs a pair of large ventilated baffle chambers that soak up rearward impulse, plus two top ports machined at a 20-degree forward angle to push gas up and forward. The end result is a rifle that stays flat and settles fast, so your reticle barely dances between rounds.
What Makes the FATman Hex Brake Different
A lot of brakes work great but chew into accuracy because of how far they sit off the crown. Phase 5 engineered the FATman so the first chamber wall sits as close to the barrel crown plane as possible, which helps preserve the accuracy your barrel was built to deliver. That close-crown design is a big part of why precision builders keep reaching for this one over cheaper options.
Built Tough and Styled to Match Your Build
Machined from steel and finished in a mil-spec black Parkerized coating, the FATman shrugs off corrosion, nicks, and the abuse of a heavy range day. It measures about 3 inches long, 1.26 inches wide at the flats, and tips the scale right around 6.1 ounces. The signature Phase 5 hex body is the styling cue custom gun builders love, and it doubles as a handy reference surface when you're timing the device with a level.
Fitment and Installation for the FATman Hex Brake
This model is threaded 1/2×28 TPI for .223 Remington and 5.56 NATO barrels, and it drops onto any barrel with an outer diameter under 0.95 inches. It ships with a crush washer so you can index and torque it into place without hunting for extra parts. Installed with the crush washer, the brake extends roughly 1.35 inches past the crown, so keep that in mind when you're planning overall length on a build.
Key Specifications
- Manufacturer: Phase 5 Weapon Systems
- Model: FATman Hex Brake
- Manufacturer Part Number: FATMAN-556
- UPC: 813318021502
- Caliber: .223 Rem / 5.56 NATO
- Thread Pattern: 1/2"-28 TPI
- Material: Steel
- Finish: Mil-Spec Black Parkerized
- Length: 3 in
- Width: 1.26 in
- Weight: 6.1 oz
- Bore Diameter: 0.28 in
- Shroud Inside Diameter: 0.95 in
- Top Ports: Two, 20-degree forward angle
- Made In: USA
What’s Included
- (1) Phase 5 FATman Hex Muzzle Brake (.223/5.56)
- (1) Crush washer
Frequently Asked Questions
What barrels will the FATman Hex Brake fit?
This version is threaded 1/2×28 TPI, so it fits standard .223 Remington and 5.56 NATO AR-15 barrels. It's designed to slip over barrels with an outer diameter smaller than 0.95 inches, which covers most common profiles. If your barrel is threaded 5/8×24 for .308 or 300 Blackout, you'll want the larger LITTLEBOY or 5/8×24 FATman version instead.
Does the FATman Hex Brake come with a crush washer?
Yes, it ships with one crush washer so you can time and torque it without buying anything extra. The hex body also makes timing easier since you can lay a level across the flat top surface to check that it's true. Many builders find they can get the timing dialed in on the first try.
Will this brake hurt my rifle's accuracy?
It's actually built the opposite way. Phase 5 designed the first chamber wall to sit as close to the barrel crown as possible, which helps maintain the full accuracy your barrel is capable of. That close-crown design is one of the main reasons precision and competition shooters gravitate toward the FATman.
How much length does the FATman Hex Brake add to my barrel?
The brake itself is about 3 inches long, and with the crush washer installed it extends roughly 1.35 inches past the barrel crown. That's worth factoring in when you're figuring out the overall length of your build. It's a common consideration on shorter barrels, so measure before you commit.






Reviews
There are no reviews yet.