$808.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The 6.5-284 Norma has earned its stripes on the firing line, and Peterson built this brass specifically for the folks running it. This is a bulk 500-count offering of unprimed match-grade casings, made right here in the USA and cut on Peterson's state-of-the-art production lines. If you shoot F-Class, benchrest, or just love reaching way out there with high-BC 6.5mm bullets, this is brass worth having on your bench.
Norma standardized this round in 1999, taking a wildcat that competitive shooters had been building for years and giving it a SAAMI home. It traces back to the .284 Winchester from 1963, a short-action powerhouse with a fat body and rebated rim. Necked down to 6.5mm, it became a long-range darling thanks to its blend of case capacity, accuracy, and manageable recoil. Peterson developed the tooling for this cartridge on the strength of its reputation in the 600 and 1,000-yard game, and it's a natural pick for anyone wanting to launch heavy 6.5mm bullets north of 2,900 fps.
Every case is annealed and final-cleaned before it leaves the factory, so you're starting with uniform necks and consistent case weight right out of the gate. Peterson's whole approach is built around getting more reloads per case than the industry average, which matters a lot when you're feeding a hungry long-range rifle. Reloaders consistently note tight tolerances, uniform flash holes, and neck concentricity that holds up load after load.
Keep in mind the 6.5-284 uses a rebated rim, so you'll want a shell holder made for this case rather than a standard .473 setup. New brass typically runs a touch under trim length, so most folks fire-form, bump the shoulder slightly, then trim to around 2.160 inches and stay on top of length from there. A light neck-size or bushing die keeps tension consistent, and a fresh anneal every handful of firings will stretch case life even further. Do the prep, and this brass will reward you with the kind of low ES and SD numbers that win matches.
No, these are unprimed cases, so you'll add your own large rifle primers as part of your load workup. Peterson does anneal and final-clean the brass at the factory, so it shows up in great shape. Most reloaders still like to run a quick prep pass to uniform necks and confirm case length before the first loading.
Peterson designs this brass to deliver more reloads per case than the industry average, and long-range shooters routinely report excellent case life when loads are kept sensible. Running near max pressure will shorten primer pocket life on any brass, so watch your charges. Annealing every few firings will help you get the most cycles out of each case.
The 6.5-284 Norma uses a rebated rim, so you'll want a shell holder sized for this case rather than a standard .473-inch holder. A dedicated 6.5-284 Norma die set works best, and many precision shooters run a bushing neck die to fine-tune neck tension. Just be sure any load data you use is spec'd for the Norma version with its longer overall length.
It's a long-range specialist, popular in 600 and 1,000-yard benchrest, F-Class, and precision hunting for game suited to .264 caliber bullets. The cartridge shines when you're pushing high-BC 6.5mm bullets at speeds above 2,900 fps. If you want flat trajectory and manageable recoil for reaching out there, this is a proven choice.
| UPC | 810068270679 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 40049-P |
| Shipping Weight | 15.7 |
You must be logged in to post a review.
Reviews
There are no reviews yet.