Peterson Unprimed Rifle Brass .375 EnABELR 50ct

Description

The .375 EnABELR is one of the newer kids in the extreme long range world, and this Peterson brass is the real foundation for it. Dreamed up by Bryan Litz of Applied Ballistics alongside Derek Peterson, the EnABELR line was built from scratch to push heavy, high-BC bullets way out there. The name itself tells the story: Engineered by Applied Ballistics for Extreme Long Range. What makes it interesting is that this is a true original design with no parent case, so you are not sitting at the bench forming brass from something else. It shows up as purpose-made cases ready to prep.

What Makes This .375 EnABELR Brass Worth It

Peterson has a reputation among precision reloaders for a reason. Their cases run tight on case wall consistency, primer pockets, and flash holes, which is exactly what you want when ignition and velocity need to repeat shot after shot. Lower runout and uniform case dimensions mean you can chase that last bit of accuracy without fighting the components. For a cartridge that lives and dies at a thousand yards and beyond, that kind of repeatability matters more here than almost anywhere else.

Reloading the .375 EnABELR the Right Way

These ship unprimed, so you pick the large rifle magnum primer that suits your powder and load workup. The wider, shorter case design was the whole point, letting powder burn more efficiently and cutting down on unburned powder fouling in the bore. Peterson brass is known for holding up through multiple firings when you treat it right, so a little attention to trimming, annealing, and neck prep goes a long way toward getting plenty of reloads out of each case.

Peterson .375 EnABELR Brass for Serious ELR Builds

This is specialized stuff for a specialized cartridge. If you are putting together an ELR rig chambered in .375 EnABELR, or already running one and need fresh brass, this is the proper starting point. Made in the USA by a family-owned shop that lives and breathes match-grade casings.