Description
Peterson Cartridge built its name on brass that reloaders can trust, and the 7mm PRC cases carry that reputation forward. Each case is produced on Peterson's modern case line with an emphasis on uniform case walls, consistent primer pockets, and clean flash holes. For a cartridge designed to launch long, heavy-for-caliber bullets in the 160 to 180 grain range, that kind of repeatability is what turns a good load into a tight group downrange.
The 7mm PRC was designed to slot neatly between the 6.5 PRC and the 300 PRC, running high-BC bullets at consistent velocities while fitting in a standard long action. Peterson's brass is tuned to get the most out of that platform. Reloaders who run this brass regularly point to its concentricity and neck tension as standout traits, and many report ten or more firings with proper annealing and care. The necks come stress-relieved and the mouths polished, so prep time on a fresh box is minimal.
What Sets Peterson 7mm PRC Brass Apart
This is match-grade brass in the truest sense, meaning the standard is held through every step from the small-batch production line to quality control. The result is case-to-case uniformity in weight, wall thickness, and internal capacity, which keeps your velocity spreads tight and your load development honest. It uses a large rifle primer pocket and ships unprimed, giving you full control over your component choices.
Loading Up the Peterson 7mm PRC
Whether you're building hunting loads for elk-sized game or chasing sub-MOA groups in precision matches, this brass gives you a dependable foundation. Trim to spec, work up your charge, and you've got cases that hold their dimensions through multiple cycles. It's American-made in Pittsburgh, Pennsylvania, by a family-owned company that caters squarely to the long-range crowd. Note that this is unprimed brass and not loaded ammunition.
Key Specifications
- Manufacturer: Peterson Cartridge
- Manufacturer Part Number: 40073-R
- UPC: 810068271034
- Caliber: 7mm PRC
- Case Material: Brass
- Primer Size: Large Rifle
- Primed: No (Unprimed)
- Grade: Match-Grade
- Quantity: 50 Per Box
- Country of Origin: Made in the USA
- Condition: New
What’s Included
- 50 unprimed 7mm PRC brass cases
- Peterson flip-top plastic ammo box
Frequently Asked Questions
Does the Peterson 7mm PRC brass come primed?
No, these cases ship unprimed with a large rifle primer pocket. That lets you select the primer that best suits your load and rifle. You'll need to prime, charge, and seat bullets as part of your normal reloading process.
How many times can I reload Peterson 7mm PRC brass?
Case life depends on your pressures, sizing practices, and whether you anneal, but reloaders commonly report ten or more firings with proper care. Annealing between cycles and avoiding maxed-out charge nodes will stretch that number further. Trimming to spec each cycle also helps keep the cases running consistently.
What bullets work best in the 7mm PRC?
The 7mm PRC was built around long, heavy-for-caliber bullets in the 160 to 180 grain range. High-BC projectiles in that window take full advantage of the cartridge's consistent velocities and fit in a standard long action. That combination is a big part of why it has caught on with both hunters and precision competitors.
Is this loaded ammunition?
No, this is unprimed reloading brass only, not loaded ammunition. It's a component intended for handloaders who assemble their own cartridges. Only use it in firearms in good condition that are chambered and marked for 7mm PRC.



Reviews
There are no reviews yet.