Peterson Brass 6.5-284 Norma Unprimed Rifle Brass – 50 Pack

Description

The 6.5-284 Norma has earned its reputation on the firing line, and Peterson brass is a big part of why so many F-Class and benchrest competitors trust it for long strings downrange. Each case is unprimed and ready for your own load development, cut to the consistent tolerances that separate a good group from a great one. If you shoot a rifle chambered for 6.5-284 and you care about where your bullets land past 600 yards, this is the kind of brass that rewards the effort you put into your reloads.

The 6.5-284 Norma started life as a wildcat built by necking the .284 Winchester down to 6.5mm, and Norma standardized it in 1999 with a 35-degree shoulder and a 2.170 inch case. It quickly became a favorite in the 600 and 1,000-yard benchrest and F-Class games thanks to its blend of case capacity, mild recoil, and flat-out accuracy. It'll happily push high-BC 6.5mm bullets fast, which is exactly what you want when the wind picks up at distance.

What Sets Peterson 6.5-284 Brass Apart

Peterson runs small-batch production lines with serious quality control behind every lot. The cases are annealed for uniform neck tension and longer case life, then final cleaned before they leave the factory. Reloaders consistently point to tight weight consistency, uniform case length, and hard, durable primer pockets that take more firings than a lot of factory brass. These use a large rifle primer pocket, so plan your primers accordingly.

Putting Your Peterson 6.5-284 Cases to Work

This is unprimed brass, meaning you handle the full prep and loading yourself. A typical workflow is a quick inspection, sizing, trimming to length, chamfer and deburr, then prime and charge. Because the necks come annealed from the factory, you're starting with consistent neck tension out of the box, which helps your first firing track with the rest of your batch. Made in the USA and shipped in Peterson's heavy-duty plastic ammo box, it's ready to go the day it hits your bench.