$147.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Adjustable gas blocks let you take control of how your AR runs, and the Patriot Ordnance Factory Dictator is one of the more capable ones out there. It's a direct-impingement block built for barrels with a .750-inch gas block journal, and it gives you nine selectable positions to fine-tune gas pressure and cyclic rate. That range matters when you swap ammo, add a can, or just want to smooth out the recoil impulse and stop over-gassing your action.
Unlike a standard block, the Dictator ships with a straight gas tube already attached, and it replaces both your old gas block and tube in one assembly. The reason for the straight design comes down to heat. A traditional tube bends where it meets the block, and that bend traps heat. By running the gas tube straight, POF cuts down on that buildup, which is a real benefit for suppressed and high-volume shooting where things get hot fast. Less heat generally means longer part life and more consistent function over a long day.
Adjustment is refreshingly simple. There's no fiddly set screw to back out. You just dial the front-mounted regulator using a flat screwdriver, a 3/32-inch hex wrench, or the included Dictator adjustment tool, and each position clicks into place. You can open it up for weak ammo or crank it down to tame back pressure when running a suppressor. It'll even close off completely if you're chasing the mildest possible impulse. Shooters who run cans consistently mention smoother cycling and cleaner chambers once they get it tuned.
One thing worth planning for: the straight-tube setup makes this a taller block than a low-profile bent-tube unit, so you'll want to confirm your handguard has the clearance around the gas block area before ordering. A rail that terminates ahead of the block or one with generous internal room is the safe bet. Finished in QPQ nitride for corrosion resistance and a hard, slick surface, this rifle-length version is a solid upgrade for a tuned, reliable build.
The Dictator's straight gas tube makes it taller than a typical low-profile bent-tube block, so handguard clearance is the main thing to check. Rails with generous internal room or ones that end ahead of the gas block area work best. Measure or confirm your handguard's clearance before installing to avoid contact with the top of the block.
This version is set up for barrels machined with a .750-inch gas block journal, which is the most common size on AR builds. It slides right on over a .750 seat. If your barrel has a .625 or .875 journal, you'd need a different block.
You dial the front-mounted regulator to any of nine positions, and it clicks positively into each setting with no set screw to fuss with. You can turn it with a flat screwdriver, a 3/32-inch hex wrench, or the included Dictator tool. Open it up for lighter loads or dial it down to cut back pressure when running a suppressor.
Yes, this is one of its strongest use cases. A suppressor adds back pressure that speeds up your carrier and dumps more gas and carbon into the action, and dialing the Dictator down lets you tame that. The straight gas tube also helps manage the extra heat that comes with suppressed shooting.
| UPC | 847313008398 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 00839 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.