Description
Recoil springs take a beating every time you rack the slide or send a round downrange, and eventually that constant compression wears them out. This assembly is the exact factory replacement Sig Sauer builds for the P320 Compact and X-Carry, giving you a straightforward way to bring your pistol's cycling back to spec without guessing on aftermarket compatibility.
P320 Compact and X-Carry Recoil Spring Fitment
This spring assembly is engineered specifically for 9mm P320 Compact, Carry, and X-Carry models, including the M18, running either the 3.9 inch non-threaded barrel or the 4.6 inch threaded barrel. Sig Sauer designs these platforms around a specific spring rate and guide rod geometry, so sticking with the factory part keeps slide timing and lockup exactly where the gun was designed to run.
Corrosion Resistant Recoil Spring Assembly Build
The assembly is made from steel and finished with a corrosion resistant coating, which adds a little extra protection if your pistol sees humidity, sweat, or gets stored for long stretches between range trips. It comes as a complete unit with the spring already mounted on the guide rod, so there's no need to source or match up separate components.
Keeping Your P320 Compact Running Right
Most armorers suggest swapping the recoil spring somewhere between 3,000 and 5,000 rounds, or once a year for guns that see regular carry or duty use, whichever hits first. A tired spring lets the slide slam home harder than it should, which speeds up wear on the frame rails and slide stop over time. Picking one of these up now, before your current spring gives out, is a cheap way to keep your P320 feeling and cycling like it did on day one.
Key Specifications
- Manufacturer: Sig Sauer
- Manufacturer Part Number: KIT-320C-9-RECOIL-SPRING
- Model Compatibility: P320 Compact, Carry, X-Carry, M18
- Caliber: 9mm
- Barrel Compatibility: 3.9" non-threaded or 4.6" threaded
- Material: Steel
- Finish: Corrosion resistant coating
- UPC: 798681594702
- Unit of Measure: Each
What’s Included
- Recoil spring
- Guide rod (pre-assembled with spring)
- Factory Sig Sauer retail packaging
Frequently Asked Questions
Will this recoil spring assembly fit my P320 Compact?
Yes, this is the factory Sig Sauer part built specifically for the P320 Compact, Carry, and X-Carry chambered in 9mm. It's designed to work with either the 3.9 inch non-threaded barrel or the 4.6 inch threaded barrel, so it covers most common configurations of these models.
How often should I replace the recoil spring on my P320?
A good rule of thumb is every 3,000 to 5,000 rounds, or once a year if your pistol sees regular carry or duty use. Waiting too long can lead to the slide cycling harder than it should, which speeds up wear on other parts.
Does this come with the guide rod or just the spring?
This is a complete assembly, meaning the spring comes already fitted onto the guide rod. You just remove the worn assembly and drop this one in during reassembly.
Is this an OEM Sig Sauer part or an aftermarket copy?
This is a genuine factory OEM Sig Sauer component, not a third party reproduction. It ships in Sig's factory retail packaging and is built to the same specs used on new production P320 Compact and X-Carry pistols.



Reviews
There are no reviews yet.