Description
Small caliber bores don't leave much room for error, and this Otis rod is built specifically for that world of .17 to .22 caliber rifles and airguns. It's a one-piece design, which matters more than a lot of folks realize. There are no threaded joints to flex or catch an edge against your rifling as the rod passes through, so you get a straight, steady stroke every time you run a patch or brush down the barrel.
What Makes the Otis Small Caliber Rod Worth the Bench Space
The rod itself is coated stainless steel, and that coating does two jobs at once. It keeps the rod from scratching or scuffing your bore, and it resists picking up the abrasive grit that soft brass and aluminum rods are notorious for embedding and dragging along the rifling. Serious barrel folks tend to favor coated or solid steel one-piece rods for exactly this reason. It's made in the USA and carries a limited lifetime warranty, which tells you Otis expects it to outlast whatever you throw at it.
Dual-Action Handle on This .17-.22 Cleaning Rod
The full-size handle is the standout feature here. It runs on steel ball bearings and gives you two ways to work. Install the swivel end and the rod turns with the rifling as you push a jag through, following the twist instead of fighting it. Swap to the fixed end when you want the rod locked solid for smooth-bore or chamber cleaning. The bigger handle also gives you real leverage and a comfortable grip, which is welcome when you're working a tight patch through a fouled .22 bore.
It uses 5-40 threads, so it pairs with Otis small caliber jags, patches, bore mops, and brushes. There's a hanging hole in the handle too, so it stores neatly on a pegboard or hook instead of rolling around your cleaning kit. This one earned Otis a 2024 ICA Accessory of the Year nod, and once you've run it through a few barrels it's easy to see why.
Key Specifications
- Manufacturer: Otis Technology
- Manufacturer Part Number: FG-SROD-AG36
- UPC: 014895015131
- Product Type: Cleaning Rod
- Caliber Range: .17 to .22 caliber
- Rod Length: 36 inches
- Rod Material: Coated stainless steel
- Construction: One-piece
- Thread Size: 5-40
- Handle Type: Full-size dual-action ball bearing (swivel or fixed)
- Intended Use: Rifles and airguns
- Storage: Hanging hole in handle
- Country of Origin: Made in USA
- Warranty: Limited Lifetime Warranty
- Award: 2024 ICA Accessory of the Year
What’s Included
- Otis 36" small caliber one-piece coated stainless steel cleaning rod with dual-action handle
Frequently Asked Questions
What calibers does this Otis small caliber cleaning rod fit?
It's designed for .17 through .22 caliber bores, covering both rimfire rifles and small caliber airguns. The 5-40 thread tip accepts Otis small caliber jags, patches, bore mops, and brushes. If you're cleaning anything larger than .22, you'll want to look at Otis's larger diameter rods instead.
Why choose a one-piece coated rod over a sectioned brass or aluminum kit rod?
A one-piece rod has no threaded joints, so there's nothing to flex or catch an edge against your rifling as it travels through the barrel. The coating also resists picking up grit, unlike softer brass and aluminum rods that can embed abrasive particles and drag them along the bore. That's why coated and solid steel one-piece rods are the go-to for anyone who cares about barrel life.
What's the difference between the swivel and fixed handle settings?
With the swivel end installed, the rod spins on ball bearings and follows the twist of your rifling as you push a patch or jag through, which keeps everything tracking naturally. Switch to the fixed end when you want the rod locked solid, which is handy for smooth-bore work or scrubbing a chamber. You get both modes in the one handle, so you can set it up however the job calls for.
Is the 36-inch length right for cleaning rifles?
Yes, 36 inches lets you run the rod all the way through most rimfire and small caliber rifle barrels from the chamber end in one clean stroke. Cleaning from the breech when you can is easier on the crown and the rifling. The full-size handle gives you plenty of grip and leverage for working a tight patch through the whole length.




Reviews
There are no reviews yet.