Description
Otis built the Professional Pistol Cleaning System around one simple idea: pull the crud out the same direction the bullet travels. Instead of pushing a stiff rod down from the muzzle, you feed a flexible Memory-Flex cable in at the chamber and draw it through toward the muzzle. That keeps grit and dirty solvent moving out of the bore rather than back into the action, and it keeps hard steel off your crown and rifling. The whole kit lives in a 4" x 4" x 2.5" soft pack with a belt loop, so it packs down small enough to disappear into a range bag or duty pack.
What the FG-645 Cleaning Kit Actually Handles
This one is set up for handguns running 9mm through .45 caliber, and the patches themselves cover a wider spread from .22 up to .45. You get caliber-marked bronze bore brushes so there's no guessing which brush goes with which barrel, plus 100% cotton panoply patches that wrap into a swab for full 360-degree contact against the bore. The Memory-Flex cables are aircraft-grade and nylon coated, and once they're inside the barrel they stiffen up and behave like a rod with serious pull strength behind them.
Precision Tools Built Into the Otis Pistol System
Where this kit earns its keep is the detail work. There's an obstruction remover that knocks out mud, snow, or a stuck casing and doubles as a T-handle base, along with a pin punch for pushing out pins, a brass scraper for carbon on flat surfaces like the guide rod, an end brush, and straight and bent picks for the tight spots most kits ignore. A chamber flag and a half-ounce of Shooter's Choice FP-10 CLP round it out, so you can clean, lubricate, and protect in one pass.
Otis has been making these in the USA for years, and they're a favorite among folks who want gear that holds up to repeated heavy cleaning sessions. If you carry a sidearm or just want your range pistols running clean, this is a compact system that covers the whole job.
Key Specifications
- Manufacturer: Otis Technology
- Model: Professional Pistol Cleaning System
- Manufacturer Part Number: FG-645
- UPC: 014895006450
- Caliber Coverage: 9mm – .45 cal (patches .22 – .45 cal)
- Style: Handgun
- Product Type: Cleaning System
- Case: Compact soft pack with belt loop, 4" x 4" x 2.5"
- Cables: 8" and 12" aircraft-grade Memory-Flex
- Brush Material: Bronze
- Solvent/CLP: 0.5 fl oz Shooter's Choice FP-10 Lubricant Elite CLP
- Cleaning Method: Breech-to-Muzzle
- Country of Origin: Made in the USA
What’s Included
- 8" Memory-Flex cable with permanently affixed slotted tip
- 12" Memory-Flex cable
- Bronze bore brushes: .22 cal, .38 cal/9mm, .40 cal, and .45 cal (caliber marked)
- 100% cotton 2" and 3" panoply patches (10 each)
- Small and large slotted tips
- Obstruction remover / T-handle base
- Female rod handle
- Pin punch
- End brush
- Brass scraper
- Straight and bent picks
- Short AP brush
- Chamber flag
- 0.5 fl oz Shooter's Choice FP-10 Lubricant Elite CLP
- Instruction manual
- Compact soft pack case with belt loop
Frequently Asked Questions
What calibers does the Otis Professional Pistol Cleaning System cover?
The kit is designed for handguns from 9mm through .45 caliber, and it ships with caliber-marked bronze brushes in .22 cal, .38 cal/9mm, .40 cal, and .45 cal. The cotton patches actually stretch a bit wider, covering roughly .22 up to .45 cal. That makes it a solid single kit for most common pistol calibers, and the brushes will also handle .38 Special and .357 Magnum revolvers.
Do I need to take my pistol apart to use this kit?
No full teardown is required to clean the bore. Because the Memory-Flex cable pulls through from the chamber out the muzzle, you can run a proper breech-to-muzzle clean without disassembling the gun. Field stripping still helps if you want to get at the guide rod or other components with the included scraper and picks.
Why does Otis clean breech-to-muzzle instead of pushing a rod from the front?
Pulling the cable from the breech toward the muzzle moves fouling and dirty solvent out the end of the barrel rather than dragging it back into the action. It also keeps hard rods off the crown and rifling at the muzzle, which is the spot that matters most for accuracy. The nylon-coated cables and brass and bronze components are softer than your steel bore, so they clean without scratching.
Is the soft pack small enough to carry to the range?
Yes, that's the whole point of this version. It packs into a lightweight 4" x 4" x 2.5" soft case with a belt loop, so it tucks easily into a range bag, duty pack, or field gear. It's compact enough to keep on hand for quick maintenance without hauling a full bench setup.



Reviews
There are no reviews yet.