Description
Brass is the material a lot of folks reach for first when they open up a firearm, and this Otis PRO+ set gives you five of them in the sizes that come up most often on the bench. Because brass is softer than the hardened steel in your gun, these punches start and loosen pins without gouging metal or chewing up a finish, which makes them a smart choice for detail work where you'd rather not leave a mark.
What You Get in the Otis PRO+ Brass Punch Set
The set covers 3/32, 1/8, 5/32, 3/16 and 1/4-inch tips, so you've got a punch for small trigger and sear pins all the way up to larger takedown pins. Each one runs 4 inches long, which gives you enough reach and leverage for controlled taps while still being short enough to handle in tight spots. The bodies are hex machined, so they won't roll off the bench and you get a positive grip when you're lining a pin up by hand.
How the Otis Brass Punches Handle on the Bench
The striking end is chamfered, which cuts down on the burring and mushrooming you'd get from a square-edged tool after repeated hammer strikes. Brass punches are best thought of as the tool you use to start and align pins, then follow up with a steel punch if something's really stuck. Used that way they'll last a long time and save your firearm's finish in the process. The brass also resists corrosion, so a little garage humidity won't turn your tips crusty.
This is a set that earns its spot in a home gunsmith's kit or a general mechanical toolbox. It's machined in the USA and backed by Otis with a limited lifetime warranty, which tells you they stand behind the steel, or brass in this case.
Key Specifications
- Manufacturer: Otis Technology
- Model: Pro Plus (PRO+)
- Manufacturer Part Number: FG-935
- UPC: 014895012307
- Product Type: Pin Punch Set
- Quantity: 5 pieces
- Punch Sizes: 3/32, 1/8, 5/32, 3/16, 1/4 inch
- Punch Length: 4 inches
- Material: Corrosion resistant brass
- Body Construction: Hex machined
- Striking Surface: Chamfered to reduce burring
- Color: Brass
- Country of Origin: Machined in the USA
- Warranty: Limited Lifetime Warranty
What’s Included
- 3/32-inch brass pin punch
- 1/8-inch brass pin punch
- 5/32-inch brass pin punch
- 3/16-inch brass pin punch
- 1/4-inch brass pin punch
Frequently Asked Questions
Why choose brass punches over steel for firearm work?
Brass is softer than the hardened steel in most firearm parts, so these punches are far less likely to gouge or scratch metal and finishes when you're driving or aligning pins. That makes them the go-to for detail work where marring is a concern. For a truly stuck pin you may still want to follow up with a steel punch after starting it with brass.
What pin sizes does the Otis PRO+ set cover?
The set includes 3/32, 1/8, 5/32, 3/16 and 1/4-inch tips. That range handles everything from small internal trigger and sear pins up to larger takedown pins, which covers the majority of common jobs on most handguns and rifles. It's a practical spread for a home gunsmith rather than a specialty setup.
How long are the punches and why does length matter?
Each punch measures 4 inches long. That gives you enough reach to get into recessed areas and enough length for controlled, deliberate hammer taps, while still being short enough to stay stable and easy to handle. The hex-machined bodies also keep them from rolling off your bench.
Is the Otis PRO+ brass punch set made in the USA?
Yes, these punches are machined in the USA by Otis Technology and carry a limited lifetime warranty. Otis is a family-owned company that's been building gun care products since the 1980s, so this set fits their reputation for solid, dependable tools.






Reviews
There are no reviews yet.