Description
When you clean guns often, running out of brushes mid-session is a headache nobody needs. This Otis pop canister solves that with 100 caliber-specific .40 bore brushes ready to grab whenever a barrel needs attention. These are the same quality brushes Otis puts in its kits, just bought in bulk so gunsmiths, ranges, agencies, and high-volume hobbyists always have a fresh one on hand.
Each brush runs phosphor bronze bristles on a brass stem, a combo that digs into carbon, powder, and copper fouling while staying gentle enough to protect the bore. The core is Otis's proprietary Tufcor wire, which resists corrosion and uses a tighter twist so the bristles hold their place instead of shedding after a few passes. Otis fills these to twice the density of a lot of competing brushes, with bristle coverage running right to the end for a more complete scrub every time.
What the Otis .40 Cal Brushes Handle
Sized for .40 caliber, these brushes also work across 10mm and .410 gauge bores, so one canister covers a good chunk of a common handgun and rimmed lineup. The stem is stamped with the brush size, which makes grabbing the right one out of a drawer of loose brushes a lot faster.
Threading and Everyday Use of the Pop Canister Brushes
Every brush uses the standard 8-32 thread, so they spin onto Otis Memory-Flex cables, standard cleaning rods, and just about any female accessory you already own. The stem is cold welded to the core for durability, and the whole design is meant to hold up to real repeat use rather than getting tossed after one job. Keep the canister on the bench, twist off a brush when you need one, and get back to what matters. Built in the USA, these are a practical restock for anyone who cleans .40s and 10mms on the regular.
Key Specifications
- Caliber: .40 cal (also cleans 10mm and .410 gauge)
- Bristle Material: Phosphor bronze
- Core Wire: Tufcor proprietary, corrosion-resistant
- Stem Material: Brass, cold welded to core
- Thread: 8-32
- Brush Length: 2 inch
- Quantity: 100 count pop canister
- Identification: Brush size stamped on stem
- Country of Origin: Made in USA
- Manufacturer: Otis Technology
- Manufacturer Part Number: AD-1083-40
- UPC: 014895003411
What’s Included
- 100 Otis .40 caliber phosphor bronze bore brushes
- Reusable pop canister for storage
Frequently Asked Questions
What calibers do these Otis .40 cal brushes clean?
They are sized for .40 caliber and also fit 10mm and .410 gauge bores. That makes a single canister useful across several common handgun and rimmed platforms. The size is stamped on each stem so you always know which brush you have in hand.
Will these brushes fit my cleaning rod?
Yes, every brush uses the industry-standard 8-32 thread. That lets them thread onto Otis Memory-Flex cables, standard cleaning rods, and most female cleaning accessories. If your setup uses 8-32 connections, these will spin right on.
Are bronze bristles safe for my barrel?
Phosphor bronze is softer than steel, so it scrubs out carbon, powder, and copper fouling without scoring the bore. Paired with the brass stem and Tufcor core, these are designed to clean effectively while protecting the barrel. As always, run the brush straight through in one direction rather than reversing it inside the bore.
Why buy a 100-count pop canister instead of a two-pack?
The bulk canister is built for anyone who cleans .40s and 10mms regularly, like gunsmiths, ranges, and departments. You get a fresh brush whenever you need one without reordering constantly, and the per-brush value goes further than buying small packs. The canister also keeps them organized on the bench.




Reviews
There are no reviews yet.