$51.99
15 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've been fighting a bore with a cheap sectioned rod that flexes and scrapes, this Otis one-piece is a real step up. It's 36 inches of coated stainless steel with a .208 diameter shaft, sized for .22 caliber and larger barrels, and the coating does the important work here. That smooth, non-embedding finish keeps abrasive grit and carbon from getting pressed into the rod and dragged back through your rifling, which is exactly the kind of thing that puts wear on a good barrel over time.
The standout feature is the full-size ball bearing handle. As you run a patch or brush down the bore, the handle lets the rod rotate freely so it follows the twist of the rifling instead of fighting it. That means less resistance, cleaner passes, and a lot less chance of forcing something crooked through your barrel. The big handle also gives you a solid grip when you hit stubborn copper or powder fouling and need a little extra push.
The tip is threaded 8-32, which is the standard Otis pattern, so it accepts their jags, bore mops, patch loops, and brushes without any adapters or fuss. If you already run Otis components, this drops right into your kit. If you're building a cleaning setup from scratch, it gives you a rock-solid backbone to add pieces to as you go.
This one is made in the USA and carries a limited lifetime warranty, which tells you where Otis stands on it holding up. A quality one-piece rod is one of those buy-it-once tools that outlives most of the guns you'll use it on. Between the coated shaft, the rotating handle, and the hanging hole for storing it on the wall or in a cabinet, it's a straightforward, dependable rod that earns its spot on the bench.
It's built for .22 caliber and larger barrels, with a .208 diameter shaft that fits down a .22 bore. The 36-inch length covers most rifles, so you can push a patch or brush clean through a full-length barrel in one pass. Pair it with the right caliber jags, brushes, and mops for whatever you're cleaning.
Yes, the full-size handle rides on steel ball bearings so the rod rotates freely as you run it down the bore. That lets it follow the twist of the rifling instead of fighting it, which makes for smoother, straighter passes. The large handle also gives you plenty of grip when you hit stubborn fouling.
The tip uses a standard 8-32 thread, which is the common Otis pattern. That means it accepts Otis jags, patch loops, bore mops, and brushes without any adapters. If you already run Otis components, this rod drops right into your kit.
The coating gives a smooth, non-embedding surface, so abrasive grit and carbon don't get pressed into the rod and dragged back through your rifling. That's the main way cheaper rods can wear a barrel over time. It also wipes clean easily and resists debris buildup between uses.
| UPC | 014895009697 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FG-SROD-22SC |
| Product Type | Cleaning Rod |
You must be logged in to post a review.
Reviews
There are no reviews yet.