Description
Got a slide cut for the RMR footprint but you're eyeing a compact optic like the Osight SE or a Holosun 507K? That mismatch is exactly what this little plate solves. The OSight RMR to RMSc Adapter Plate sits between your RMR-cut slide and an RMSc-pattern red dot, letting the narrower optic bolt down securely without you having to buy a new slide or send yours off for aftermarket milling.
It's machined from SUS420 stainless steel using CNC integrated machining, then finished with a matte black PVD coating that holds up well to wear and the kind of handling a carry or range gun sees. Stainless gives you real mechanical strength in a thin footprint, so the optic stays locked in and holds zero through live fire when it's torqued down right. The whole plate weighs in around 14 grams, so it adds next to nothing to the slide.
What the OSight RMR to RMSc Plate Actually Fits
This one converts an RMR footprint down to the RMSc footprint, and it also plays nice with Holosun K-pattern optics. That opens the door to the Osight S, SE, Holosun 407K and 507K, and EPS Carry, among other RMSc and K footprint red dots. One thing worth knowing up front: these plates are designed for standard RMR cuts, and they don't work with RMR cuts that use front mounting posts, so give your slide a look before ordering.
Getting the OSight Adapter Plate Dialed In
Install is quick and comes with the mounting screws and a tool in the box. Go easy on the torque. The manufacturer recommends keeping it at or below 18 kgf·cm, since cranking too hard risks snapping a screw or warping the plate. Any adapter plate raises the optic slightly by its own thickness, so if you co-witness with irons, suppressor-height or taller sights are the move to line things back up. For a slide you want to keep flexible on optic choices, it's a clean, rugged way to get there.
Key Specifications
- Manufacturer: OSight
- Manufacturer Part Number: RMRTORMSC
- UPC: 6978095650148
- Slide Footprint: RMR
- Optic Footprint: RMSc / Holosun K
- Material: SUS420 Stainless Steel
- Coating: Matte Black PVD
- Color: Black
- Weight: Approx. 14 grams (0.76 oz)
- Dimensions: Approx. 45.2 mm x 25.5 mm x 4.3 mm
- Recommended Torque: 18 kgf·cm or less
- Machining: CNC Integrated
What’s Included
- RMR to RMSc adapter plate
- Mounting screws
- Installation tool
Frequently Asked Questions
What optics will the OSight RMR to RMSc adapter plate work with?
It converts an RMR footprint slide to accept RMSc and Holosun K pattern optics. That covers red dots like the Osight S and SE, the Holosun 407K and 507K, and the EPS Carry. If your optic uses an RMSc or K footprint, it should line up.
Does this adapter plate fit RMR cuts with front mounting posts?
No. The plate is built for standard RMR cuts and is not designed to work with RMR cuts that use front mounting posts. Check the underside of your slide before ordering, since post-style cuts need a different solution.
Will the adapter plate raise my optic and affect co-witness?
Yes, slightly. Any adapter plate lifts the optic by its own thickness, which is a few millimeters here. If you co-witness with iron sights, you'll likely want suppressor-height or taller sights to realign your sight picture.
How tight should I torque the screws on the OSight adapter plate?
The manufacturer recommends keeping torque at or below 18 kgf·cm. Over-tightening can break a screw or deform the plate, so don't muscle it down. A proper torque and good thread engagement keep the optic holding zero through live fire.





Reviews
There are no reviews yet.