Description
The OptiVISOR No. 7 is the 7-diopter lens plate, giving you 2.75X magnification at a working distance of about 6 inches. That focal length puts it in the sweet spot for close, hands-on detail work like checking engraving lines, cleaning up small parts, inspecting bores and threads, or picking apart tiny springs and pins that your naked eye starts to fight with. It clicks straight into the OptiVISOR headband, so if you already run one of these visors, this is the lens that gets you in tight on the fine stuff.
Where the No. 7 Lens Plate Earns Its Keep
At 2.75X you're getting real magnification without giving up too much field of view, which is why this power is a favorite for detailed bench work. Bring the piece in to roughly 6 inches and everything snaps into focus. Gunsmiths lean on it for close inspection and fitting, and the same lens sees plenty of use in jewelry, watch repair, electronics, and fly tying. The optics are ground and polished to precision standards for a clean, distortion-free view that keeps your eyes comfortable over a long session.
Built to Swap and Made to Last
One of the best parts of the OptiVISOR system is that the lens plates are interchangeable. This No. 7 plate mounts in and out with ease, so you can keep a couple of powers on hand and switch between them depending on the job in front of you. The lens sits in a tough high-impact frame, and like the rest of the OptiVISOR line, it's made in the USA.
A Quick Note on Diopters and Magnification
Diopter and magnification aren't the same number, which trips a lot of people up. The No. 7 is a 7-diopter lens that works out to 2.75X. Higher diopter means more magnification but a shorter working distance, so if you find 2.75X pulling you in closer than you'd like, a lower-power plate gives you more room. This one hits a nice middle ground that handles most fine detail work well.
Key Specifications
- Manufacturer: Donegan Optical (OptiVISOR)
- Manufacturer Part Number: LP-7
- UPC: 633096000564
- Lens Number: No. 7
- Magnification: 2.75X
- Diopter: 7-diopter
- Focal Length: 6 inches (15.24 cm)
- Lens Type: Prismatic, ground and polished optical lens
- Frame Material: High-impact plastic
- Compatibility: Interchangeable with OptiVISOR headband magnifiers
- Country of Origin: Made in USA
What’s Included
- One OptiVISOR No. 7 (LP-7) replacement lens plate, 2.75X magnification
Frequently Asked Questions
Does the OptiVISOR No. 7 lens plate work with any OptiVISOR headband?
Yes, this plate is designed to interchange with the standard OptiVISOR headband magnifier system. It mounts in and out easily, so you can keep several lens plates and switch powers based on the task. The headband itself is sold separately if you don't already own one.
What is the working distance with the 2.75X No. 7 lens?
The No. 7 lens plate has a focal length of about 6 inches, meaning that's roughly how far you'll hold your work from the lens for sharp focus. It's a comfortable range for close detail work without pulling you right on top of the piece. If you need more room to work, a lower-power plate gives you a longer focal distance.
Is a 7-diopter lens the same as 2.75X magnification?
They describe the same lens but they aren't the same number. Diopter measures the lens curvature, while magnification tells you how much larger the object appears. The 7-diopter No. 7 plate works out to 2.75X, and generally a higher diopter means more magnification with a shorter working distance.
What kind of work is the No. 7 lens plate best suited for?
The 2.75X power is a solid all-around choice for fine bench work. Gunsmiths use it for close inspection and small parts fitting, and it's equally at home for jewelry, watch repair, electronics, and fly tying. It balances real magnification with a usable field of view.





Reviews
There are no reviews yet.