Description
The OptiVISOR No. 3 lens plate gives you 1.75x magnification at a roomy 14-inch focal distance, which is the sweet spot for a lot of gunsmithing and hobby work where you want a little bump in detail without your face buried in the project. It's a genuine Donegan replacement plate built with prismatic optical glass, ground and polished to precision standards with beveled edges and set in a plastic frame that clicks straight into the headband.
Where the No. 3 Lens Plate Earns Its Keep
That 14-inch working distance is the big draw here. You get enough room to run a screwdriver, file, or soldering iron without bumping into your work, which makes the No. 3 plate a natural fit for detailed assembly, stone setting, engraving, fly tying, and general close inspection. It's the same lens plate that ships standard on the DA-3 headband, so you're getting factory optics, not a knockoff.
Swapping the LP-3 Into Your OptiVISOR
Every OptiVISOR lens plate is interchangeable, meaning any plate fits any headband. The frame mounts with plastic pins, so pulling one plate and dropping in another takes seconds and no tools. If you already run a stronger plate for tight detail work, keeping a No. 3 on hand lets you back off to a wider, easier-on-the-eyes view when you need more room to move.
Optical Glass That Holds Up
Donegan uses crown ophthalmic glass rather than plastic, and it shows in the clarity. The prismatic design cuts down on eye strain during long stretches at the bench, which is exactly what you want when you're squinting at small parts for hours. Made in the USA, the No. 3 plate is a straightforward, reliable upgrade or replacement that fits into the system you already own.
Key Specifications
- Manufacturer: Donegan Optical (OptiVISOR)
- Manufacturer Part Number: LP-3
- Model: No. 3
- UPC: 633096000533
- Magnification: 1.75x
- Diopter: 3 diopter
- Focal / Working Distance: 14 inches
- Lens Material: Prismatic optical glass (crown ophthalmic)
- Frame Material: Plastic, interchangeable
- Compatibility: Fits all OptiVISOR headbands
- Country of Origin: Made in USA
What’s Included
- One OptiVISOR No. 3 (LP-3) replacement lens plate
Frequently Asked Questions
Does the OptiVISOR No. 3 lens plate come with the headband?
No, this is the lens plate only. It's a separate replacement or add-on plate and does not include the OptiVISOR headband. It's the same lens plate that comes standard on the DA-3 headband, so if you already own an OptiVISOR you just pop this one in.
Will the No. 3 plate fit my existing OptiVISOR?
Yes. All OptiVISOR lens plates are interchangeable, so any plate fits any headband. The frame mounts with plastic pins that let you remove and install lenses quickly by hand, no tools needed.
What kind of work is the 1.75x magnification best suited for?
The No. 3 plate gives 1.75x magnification at a 14-inch focal distance, which leaves plenty of room between your eyes and the project. That makes it well suited for detailed assembly, engraving, soldering, stone setting, fly tying, and general close inspection where you want a modest magnification boost with a comfortable working distance.
Is the lens made of glass or plastic?
The two lenses in the No. 3 plate are optical glass, specifically crown ophthalmic glass ground and polished to precision standards with beveled edges. Glass optics give you sharp clarity and help reduce eye strain during long sessions at the bench.





Reviews
There are no reviews yet.