Description
This is the Plate 19 component of Arisaka Defense's modular Offset Optic Mount system, cut for the Holosun 407K and 507K footprint. It is a tall-height plate meant to match scopes mounted at 1.9" to 2.2", so your offset red dot ends up at a natural height when you cant the rifle to transition off your primary optic. One thing worth knowing up front: this is the plate only. A complete offset mount needs both a base and one optic plate, so you'll want the Arisaka Offset Optic Mount base to go with it if you don't already have one.
How the Plate 19 Fits Into the Arisaka Offset System
Arisaka's offset setup is clever because it's modular. The base clamps to your Picatinny rail, and the plate carries your red dot. Swap the stem orientation during assembly and you can run either a 35 or 45 degree offset angle without buying anything extra. The 35 degree position tucks the dot closer in for slimmer scopes, while 45 degrees opens up clearance for bigger glass. Because the base and plate can be reversed, the whole thing works as a lefty or righty setup.
Build Quality on the Holosun 407K/507K Offset Plate
Like the rest of the line, this plate is CNC machined from 6061 aluminum and finished in MIL-A-8625 Type III hard coat anodizing, which is the same hard-wearing finish you'll find on quality rail gear. It ships with the two M4 screws needed to attach it to the base. Keep the torque reasonable when you mount your optic to the plate, and do not exceed 20 inch pounds on those optic screws.
Getting the Most From This Offset Plate
The tall height here is the whole point. If you're running a larger LPVO in a 1.9" to 2.2" mount, matching that height keeps your head position consistent when you roll the gun over to the dot. For a 407K or 507K owner who wants a fast, repeatable backup sight for close work, this plate drops right into the Arisaka system and gets you there.
Key Specifications
- Manufacturer: Arisaka Defense
- Manufacturer Part Number: OOM-P19
- UPC: 601557940063
- Plate Number: Plate 19
- Optic Compatibility: Holosun 407K, 507K
- Plate Height: Tall (for 1.9" to 2.2" scope mounts)
- Offset Angle: 35 or 45 degrees (selectable at assembly)
- Material: 6061 aluminum, CNC machined
- Finish: MIL-A-8625 Type III hard coat anodized
- Color: Black
- Mounting Platform: Pairs with Arisaka Offset Optic Mount base (Picatinny)
- Co-Witness: Lower 1/3
- Max Optic Screw Torque: Do not exceed 20 inch pounds
- Made In: USA
What’s Included
- Offset Optic Plate 19 (Holosun 407K/507K, tall height)
- Two M4 screws for attaching the plate to the base
Frequently Asked Questions
Does this Arisaka offset plate come with the mount base?
No. This listing is for Plate 19 only, which is the optic plate portion of the system. A complete offset mount requires both the Arisaka Offset Optic Mount base and one plate, so you'll need the base separately if you don't already own one.
Which optics fit the Plate 19 offset plate?
It's cut for the Holosun 407K and 507K footprint. Arisaka also notes the Holosun EPS and EPS Carry work with Plate 19, though those optics need the newer M4x9.8mm screws that began shipping with them in 2026. For the EPS, some references point users toward Plate 8 with the adapter included with the optic, so double check your specific optic's instructions.
What's the difference between the tall plate and the standard plate?
This is the tall-height version, built for scopes mounted at 1.9" to 2.2". The standard plate is sized for 1.5" to 1.8" scope mounts. The idea is to match the plate height to your primary optic's mount so your head position stays consistent when you cant over to the red dot.
Can I run a 35 or 45 degree offset with this plate?
Yes. The Arisaka system lets you pick 35 or 45 degrees by reversing the stem between the plate and base during assembly, no extra parts needed. The 35 degree setting brings the dot in closer for slimmer scopes, while 45 degrees adds clearance for larger glass. The setup is also fully ambidextrous for left or right side use.





Reviews
There are no reviews yet.