$89.30
5 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Running a large-frame AR that feels a little harsh, or cycles rough after adding a suppressor or adjustable gas block? The Odin Works AR-10 Adjustable Rifle Buffer gives you a way to fix that at the source instead of guessing. Built for rifle-length buffer tubes in the AR-10 platform, it uses a lightweight aluminum body with an internal weight system you can rearrange to match your exact setup. Swap the included weights around and you can shift the overall mass across a range of roughly 3.17 to 7.05 ounces, which is plenty of room to smooth out the action on just about any .308-class build.
Most recoil complaints on large-frame rifles come down to a mismatch between gas, ammo, and buffer mass. Rather than chasing different springs or messing with the gas block for hours, this buffer lets you tune the reciprocating weight directly. Lighter setups speed up the cycle and help with lock-back on low-pressure loads, while a heavier combination slows things down and takes the edge off recoil when you are running hot ammo or a can. It is a straightforward, repeatable way to get the feel you are after.
The kit ships with a full set of tunable weights so you are not stuck buying extras right away. You get 5.5 ounces of aluminum, 3 ounces of stainless steel, and 2 ounces of tungsten to mix and match. Builders who want to go heavier at the top end can add more tungsten, which Odin sells separately. Everything is machined in the USA, and the fit and finish are what you would expect from Odin Works gear.
This one matters: the buffer is made for AR-10 rifle-length receiver extensions, not carbine tubes. If your lower runs a full rifle-length tube and you want more control over how the gun cycles, this drops right in and gives you a real tuning tool for competition, hunting, or just a nicer-shooting range rifle.
No, this model is built specifically for AR-10 rifle-length buffer tubes, not carbine tubes. If your lower is set up with a full rifle-length receiver extension, this is the right buffer. For carbine or pistol-length tubes you would need a different Odin Works model.
The buffer body holds a stack of interchangeable internal weights that you rearrange to change the total mass. With the included aluminum, stainless, and tungsten weights you can set it anywhere in the roughly 3.17 to 7.05 ounce range. Lighter helps with cycling reliability on softer loads, while heavier tames recoil on hot ammo or a suppressed setup.
Yes. The buffer ships with a full set of weights, and Odin Works sells additional tungsten weights separately if you want to push the mass higher than the included combination allows. That is handy for heavily suppressed or over-gassed builds that need extra buffer mass to settle down.
A standard buffer gives you one fixed weight, so your only tuning options are the spring or the gas system. This Odin Works adjustable buffer lets you tune the reciprocating mass directly, which is often the fastest way to fix rough cycling or snappy recoil, especially after adding a suppressor or adjustable gas block.
| UPC | 850048530614 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | OSABSAR10RIFLE |
You must be logged in to post a review.
Reviews
There are no reviews yet.