$75.05
249 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Chasing perfect cycling on an AR-15 usually means buying a handful of buffers in different weights and swapping them until something feels right. The Odin Works Lite Adjustable Buffer skips all that. It's a carbine-length buffer with an aluminum body that holds interchangeable weights, so you can fine-tune the reciprocating mass inside a single unit and stop guessing. The Lite covers a range from 2.1 ounces all the way up to 4.2 ounces, which lands you right around a standard carbine buffer at the top end and gets seriously light at the bottom.
Inside the body you get seven weights total: three aluminum, three stainless steel, and one tungsten. Each material has a different mass, so mixing and matching lets you land on the exact weight your gas system wants. The aluminum weights come in the lightest, stainless in the middle, and tungsten adds the most heft per slot. Adjusting is refreshingly simple. A set screw on the face of the buffer backs out, you pick three of the seven weights, and you're done. No punching out roll pins, no wrestling a nylon endcap, no special tools beyond the included Allen wrenches.
This one leans toward lighter builds. Competition guns, lightweight ARs, and rifles running softer or reduced loads all benefit from being able to drop weight without short-stroking. It's also a great fix for an over-gassed rifle that's throwing brass way downrange or feeling snappy, since a little more buffer mass calms the recoil impulse and helps flatten muzzle rise between shots. A common recommendation is running the Lite on 14.5 to 16 inch barrels, while shorter or heavily suppressed setups usually want the Heavy version instead.
The buffer body is machined from aluminum and the whole thing is made in Southern Idaho. It drops into any AR-15 using a mil-spec or commercial carbine-length receiver extension, and Odin Works backs it with a lifetime warranty. If you like knowing your setup is dialed in exactly where you want it, this takes the trial-and-error out of the equation.
You back out the set screw on the face of the buffer with the included Allen wrench, then choose three of the seven included weights and drop them into the body. Once you've got your combination, snug the set screw back down and you're set. There are no roll pins to punch or endcaps to remove, so tuning takes just a few minutes at the bench.
The Lite covers 2.1 ounces at its lightest up to 4.2 ounces fully loaded. That top end lands right around a standard carbine buffer, while the lighter combinations are aimed at competition builds and rifles running reduced or lighter loads. The aluminum, stainless, and tungsten weights each add a different amount of mass, so you can fine-tune in between.
The Lite is the better pick for competition guns, lightweight builds, over-gassed rifles, and setups running lighter ammo, generally on 14.5 to 16 inch barrels. If you're running a short barrel, a heavily suppressed rig, or something like a 300 Blackout, the Heavy version gives you the extra mass those setups tend to need. When in doubt, match the buffer range to how much gas your system is dumping.
Yes, it fits AR-15 platforms using a mil-spec or commercial carbine-length receiver extension. It installs just like any other carbine buffer, so if your rifle takes a standard carbine buffer now, this one will slide right in. No modifications to the tube or spring are required.
| UPC | 857116007979 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | OS-ABS-AR15-LITE |
| Color | ADJUSTABLE BUFFER |
| Length | 8.2000 |
| Product Type | Buffer |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.