Description
Nosler built its reputation on bullets, and when they started making suppressors at their Redmond, Oregon facility, they brought the same engineering mindset to the table. The SR-22 ALTi is the hybrid model in their .22 caliber lineup, and the recipe is smart: the blast chamber and first baffle, the parts that take the most heat and abuse, are machined from titanium, while the rest of the can uses aluminum to keep weight and cost down. The result is a suppressor that tips the scale at just 9 ounces while still handling anything from .22 LR rimfire up through 5.56mm rifles.
Why the SR-22 ALTi Makes Sense for Hunters
That weight figure is the headline here. If you spend real time behind a predator rifle or hike into varmint country, you know how a heavy can changes the balance of a rifle and wears on you over a long day. At 7.53 inches long and 1.74 inches in diameter, the SR-22 ALTi adds sound reduction of around 29 dB without turning your rig into a boat anchor. It threads directly onto standard 1/2×28 barrels, which covers most rimfire rifles and plenty of .223 and 5.56 bolt guns and ARs. Nosler recommends it for full-length barrels and standard-pressure cartridges at a moderate rate of fire, which describes hunting and precision work perfectly.
Serviceable Design, Built to Last
Nosler used a modular layout that joins the baffle stack to the blast chamber with an exterior jam nut, so the can comes apart for cleaning without a fight. That matters a lot on a suppressor that will see .22 LR, since rimfire ammo is famously dirty. The blast chamber is the serialized component, which means Nosler can turn around repairs quickly if the front end ever needs attention. Between the titanium wear parts, the easy maintenance, and the barely-there weight, this is a can built for people who carry their rifles more than they haul them to a bench.
Key Specifications
- Manufacturer: Nosler
- Model: SR-22 ALTi
- Manufacturer Part Number: 90600
- UPC: 054041906005
- Caliber Rating: .22 caliber and smaller, including 5.56mm
- Construction: Titanium blast chamber and blast baffle with aluminum body
- Weight: 9 oz
- Length: 7.53 inches
- Diameter: 1.74 inches
- Sound Reduction: Approximately 29 dB
- Thread Pattern: 1/2×28 TPI direct thread
- Finish: Matte Black
- Serialized Component: Blast chamber
- Made In: Redmond, Oregon, USA
What’s Included
- Nosler SR-22 ALTi suppressor
- 1/2×28 direct thread muzzle adapter
- Owner's manual
Frequently Asked Questions
Can I shoot 5.56 through the Nosler SR-22 ALTi or is it rimfire only?
It handles both. The SR-22 ALTi is rated for .22 caliber and smaller cartridges, including 5.56mm rifles, thanks to the titanium blast chamber and first baffle taking the brunt of the heat and pressure. Nosler does recommend sticking to full-length barrels, standard-pressure loads, and a moderate rate of fire, so it is best suited for hunting rifles and bolt guns rather than heavy mag dumps on a short-barreled AR.
Can the SR-22 ALTi be taken apart for cleaning?
Yes, and that is a big plus for anyone planning to run .22 LR through it. The baffle stack joins the blast chamber with an exterior jam nut, so the can disassembles for cleaning, maintenance, and parts replacement. Rimfire ammo leaves a lot of lead and carbon behind, so being able to open it up will keep it performing over the long haul.
What is the difference between the SR-22 ALTi and the SR-22 Ti?
The SR-22 Ti is Nosler's all-titanium version, which weighs about 13 ounces and is built for higher round counts and harder use. The ALTi swaps most of the body to aluminum, keeping titanium only in the blast chamber and first baffle where it matters most. That trims the weight to 9 ounces, making the ALTi the better pick for hunters and anyone prioritizing a light muzzle.
Will the Nosler SR-22 ALTi fit my rifle's threads?
It uses a 1/2×28 TPI direct thread mount, which is the most common thread pattern on .22 LR rifles and pistols as well as most .223 and 5.56 barrels. If your barrel is threaded 1/2×28, it screws right on. If your barrel is not threaded, a gunsmith can cut threads for you fairly easily on most rimfire and centerfire barrels.



Reviews
There are no reviews yet.