Description
The Nosler RDF .30 caliber (.308) 175 grain HPBT is a match-grade projectile aimed squarely at precision reloaders and competition shooters who want every edge the wind will give them. RDF stands for Reduced Drag Factor, and that name isn't just marketing. With a G1 ballistic coefficient of 0.536 and a G7 of 0.270, this bullet was engineered from the ground up to deliver a flatter trajectory and the least wind drift Nosler could design into a .308 projectile.
The secret is in the shape. Nosler pairs a meticulously optimized compound ogive with a long, drag-reducing boat tail to create an incredibly sleek form factor. That compound ogive also makes the bullet forgiving when it comes to seating depth, so you can get consistent results without chasing the lands obsessively. At 175 grains with a sectional density of 0.264 and an overall length of 1.330 inches, it sits right in the sweet spot that so many .308 and 300 Blackout subsonic and standard match loads are built around.
What Sets the RDF 175 gr Apart at the Loading Bench
One of the biggest time-savers with the Nosler RDF line is the meplat. These bullets have the smallest, most consistent meplats of any hollow point match bullet Nosler produces, which means you can skip the tedious tip pointing and meplat trimming that other match bullets often require. Load them, seat them, and shoot. For folks cranking out big volumes of precision ammo, that's a real chunk of prep work off your plate.
Chambering the Nosler RDF 175 Grain
This .308 diameter bullet is a natural fit for .308 Winchester, .30-06, .300 Win Mag, and plenty of other .30 cal cartridges where handloaders want high-BC performance for target and competition work. Made in the United States, the 500 count box gives dedicated reloaders and match shooters plenty of projectiles to develop a load and then run it all season long.
Key Specifications
- Manufacturer: Nosler
- Bullet Type: RDF (Reduced Drag Factor)
- Caliber: .30 (.308 diameter)
- Bullet Weight: 175 grain
- Bullet Profile: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.536
- Ballistic Coefficient (G7): 0.270
- Sectional Density: 0.264
- Overall Length: 1.330 in
- Cannelure: No
- Lead Free: No
- Quantity: 500 count
- Country of Manufacture: United States
- Manufacturer Part Number: 53171
- UPC: 054041531719
What’s Included
- 500 Nosler RDF .30 caliber (.308) 175 grain HPBT bullets
Frequently Asked Questions
What makes the Nosler RDF 175 grain different from a standard match bullet?
The RDF's edge comes from its compound ogive and long, drag-reducing boat tail, which together produce a high G1 BC of 0.536 for flatter flight and less wind drift. On top of that, Nosler holds the meplats on the RDF line tighter than any other hollow point match bullet they make. That consistency is what helps these bullets group so well without extra prep.
Do I need to trim or point the meplats on these RDF bullets?
No, and that's one of the best parts. Nosler designed the RDF with the smallest, most consistent meplats in their lineup, so there's no need to point tips or trim meplats before loading. You save a lot of bench time compared to other high-BC match bullets.
What cartridges work well with the .308 175 grain RDF?
This .308 diameter 175 grain bullet is a great match for .308 Winchester, .30-06 Springfield, .300 Win Mag, and other .30 caliber cartridges used for target and competition handloading. The 175 grain weight is a proven favorite for long-range accuracy in the .308 world. The compound ogive also makes it fairly insensitive to seating depth, which simplifies load development.
Is the Nosler RDF a hunting bullet or a target bullet?
The RDF is designed as a match and target projectile for competition and precision shooting, not as a hunting bullet. Its hollow point is built purely for aerodynamic efficiency and reduced drag rather than terminal expansion. If you're after tight groups and flat trajectories on paper and steel, this is where it shines.





Reviews
There are no reviews yet.