Description
Nosler built the Custom Competition line to give handloaders a genuine match bullet at a price that doesn't make you flinch at the loading bench. This 6.5mm (.264 diameter) 123 grain hollow point boat tail is one of the most popular projectiles in the lineup, and it shows up in everything from 6.5 Grendel ARs to Creedmoor bolt guns and 6.5×55 Swedes. The recipe is straightforward: a custom-quality jacket form-fitted to an ultra-precise lead-alloy core for the kind of concentricity and balance that translates directly into tight groups downrange.
What Makes the Custom Competition 6.5mm Shoot
The small meplat on the hollow point cuts drag and boosts aerodynamic efficiency, while the pronounced boat tail keeps the bullet stable and predictable across a wide spread of velocities. With a G1 ballistic coefficient of .510 and a sectional density of .252, this 123 grain pill holds its energy and bucks the wind well past where lighter bullets fall apart. Reloaders running the 6.5 Grendel regularly report it staying supersonic out to 1000 yards with a solid mid-range load.
Loading Notes for the 123gr HPBT
The overall bullet length runs right at 1.200 inches, and the ogive profile sits a little different than the old 123 A-Max, so expect to reset your seating die if you're switching over. Many Grendel shooters land around a 2.25 to 2.26 inch cartowall length as a starting point, and Nosler publishes load data on their site to get you dialed in. These bullets are hand-inspected for quality, which is a big part of why they punch so far above their price class compared to other match slugs.
A Smart Pick for the 6.5mm Reloader
Shooters who've run these for years keep coming back for the same reason: dependable accuracy that rivals bullets costing a good bit more. For high-volume range work, load development, or stacking up match ammo without blowing the budget, this 1000 count box of 6.5mm Custom Competition is tough to beat.
Key Specifications
- Manufacturer: Nosler
- Caliber: 6.5mm (.264 diameter)
- Bullet Weight: 123 grain
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Ballistic Coefficient (G1): 0.510
- Sectional Density: 0.252
- Bullet Length: 1.200 in
- Cannelure: No
- Lead Free: No
- Box Quantity: 1000
- Country of Manufacture: United States
- Manufacturer Part Number: 59744
- UPC: 054041597449
What’s Included
- 1000 count box of Nosler Custom Competition 6.5mm 123gr HPBT reloading bullets
Frequently Asked Questions
What cartridges can I load the Nosler Custom Competition 6.5mm 123gr bullet in?
This .264 diameter bullet works in any 6.5mm cartridge your rifle's twist rate will stabilize. It's a favorite in the 6.5 Grendel, and reloaders also run it in the 6.5 Creedmoor, 6.5×55 Swede, .260 Remington and similar rounds. Always confirm your barrel twist handles the 123 grain weight before loading.
Is the Custom Competition a true match bullet?
Yes. Nosler pairs a custom-quality jacket with a hand-selected, ultra-precise lead-alloy core, and every bullet is hand-inspected for quality. It's widely considered one of the best values in match-grade projectiles, delivering accuracy on par with pricier options from other makers.
Does the 123gr Custom Competition have a cannelure?
No, this bullet does not have a cannelure. That's typical for a match projectile, since a crimp groove can disturb the jacket and affect consistency. Most handloaders seat these with a light taper crimp or no crimp at all, depending on their rifle.
What's the ballistic coefficient and seating depth for this bullet?
The 123 grain HPBT carries a G1 ballistic coefficient of .510 with a sectional density of .252 and a bullet length right around 1.200 inches. Many 6.5 Grendel shooters start near a 2.25 to 2.26 inch overall length, but keep in mind the ogive sits differently than some 123gr competitors, so you'll want to reset your seating die and reference Nosler's published load data.




Reviews
There are no reviews yet.