Description
The 160-grain AccuBond is one of the most trusted .284 hunting bullets a 7mm reloader can put on the bench, and for good reason. Nosler bonds a tapered copper-alloy gilding metal jacket to a lead-alloy core through a proprietary process that eliminates voids and keeps the two from separating on impact. The payoff is a bullet that flies true, penetrates deep, and typically holds onto 60 to 70 percent of its weight at normal hunting velocities. The gilding metal jacket also keeps fouling down compared to the pure-copper jackets found on a lot of other bonded bullets, which is a nice bonus when you're shooting strings during load development.
What Makes the 160gr AccuBond Tick
This is a spitzer boat-tail with a .531 G1 ballistic coefficient and a .283 sectional density, so it carries energy well and bucks wind better than flat-base designs at distance. The signature white polymer tip does double duty: it resists deforming in the magazine under recoil and initiates expansion on impact. At the rear, Nosler's Solid Base acts as a platform that supports a wide, controlled mushroom. Minimum recommended impact velocity sits around 1800 fps, which gives you a realistic performance window to work with when you're figuring out your maximum ethical range.
Loading the 7mm 160gr AccuBond
Reloaders consistently praise how easy this bullet is to find an accurate node with. It's a favorite in the 7mm Rem Mag, .280 Remington, and 280 Ackley Improved, and plenty of folks run it in the 7mm WSM and 7mm STW too. Powders like IMR 7828, RL-19, and IMR 4350 show up again and again in proven loads, and many handloaders report half-inch groups once they dial things in. Just keep in mind it's a jacketed hunting bullet, not loaded ammunition, so you'll be supplying your own brass, powder, and primers.
For deer, elk, bear, and even moose, the 160 AccuBond has a long track record of one-shot performance when the velocity and accuracy come together in your rifle.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 54932
- UPC: 054041549325
- Model: AccuBond
- Caliber: 7mm
- Bullet Diameter: .284"
- Bullet Weight: 160 Grains
- Bullet Style: Spitzer Boat Tail, Bonded Polymer Tip
- Ballistic Coefficient (G1): 0.531
- Sectional Density: 0.283
- Minimum Recommended Velocity: 1800 fps
- Cannelure: No
- Jacket Material: Tapered Copper-Alloy Gilding Metal
- Core: Lead-Alloy
- Bullets Per Box: 50
What’s Included
- 50 Nosler AccuBond 7mm (.284) 160gr Spitzer Boat Tail bullets
Frequently Asked Questions
What cartridges is the 160gr AccuBond a good fit for?
This .284 bullet is a staple for the 7mm Rem Mag, .280 Remington, and 280 Ackley Improved, and it also works great in the 7mm WSM and 7mm STW. Handloaders have used it to take deer, elk, bear, and moose across a wide range of setups. As long as your twist rate stabilizes a 160-grain bullet, you're in good shape.
How much weight does the Nosler AccuBond retain on impact?
Thanks to the proprietary bonding process that locks the jacket to the core, the AccuBond typically retains 60 to 70 percent of its weight at normal hunting velocities and ranges. Many reloaders report recovered bullets expanded to roughly twice their original diameter with the core still intact. That combination is what makes it reliable on heavier game.
Is this loaded ammunition or a component bullet?
These are component bullets for reloading, not loaded cartridges. You'll be supplying your own brass, powder, and primers to build your loads. The box contains 50 jacketed 160-grain projectiles ready to seat once you've worked up your recipe.
Does the 160gr AccuBond have a cannelure?
No, this bullet does not have a cannelure. That gives you flexibility to set your own seating depth during load development without being tied to a crimp groove. Most handloaders chasing accuracy appreciate that freedom.








Reviews
There are no reviews yet.