Description
Nosler built the AccuBond Long Range line for hunters who load their own and like to reach out past where most bullets start to run out of steam. This 6.5mm/.264" 129-grain projectile pairs a high ballistic coefficient with a bonded core, so you get a flat-shooting bullet that still does its job on game when the shot stretches out. For the 6.5 Creedmoor, 6.5 PRC, 6.5-284, and similar cartridges, this is one of the go-to component bullets for elk and mule deer at distance.
What Makes the AccuBond Long Range Tick
The bonded lead core and tapered copper jacket are the heart of this design. Bonding keeps the core and jacket locked together through impact, which means high weight retention and deep penetration even when you hit a bone or push velocity hard. The gray polymer tip resists deformation during recoil, feeds smoothly, and helps kick off expansion when it matters. Up front you've got a long ogive and a boat-tail base, the combo that gives this bullet its slippery profile and flat trajectory.
Ballistics and Reloading Notes for the 129gr ABLR
Nosler rates this 129-grain bullet with a G1 BC of 0.530 and a G7 of 0.267, with an overall length right around 1.370". Sectional density comes in at 0.264. One of the standout features here is expansion down to a minimum impact velocity of 1300 fps, compared to the 1800 fps minimum on most other Nosler hunting bullets. That lower threshold is what lets the ABLR keep performing on game when you're stretching things past what a typical hunting bullet can handle.
Dialing It In
The tangent ogive was designed to shoot well in a wide range of rifles without needing to seat right up against the lands, which makes load development a little more forgiving. These are component bullets for handloading, not loaded ammunition, so grab your dies, pick your powder, and work up a load that your barrel likes. With a 1-8" twist or faster, most 6.5mm rigs will stabilize this bullet just fine.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 58943
- UPC: 054041589437
- Caliber: 6.5mm
- Bullet Diameter: 0.264"
- Bullet Weight: 129 Grain
- Bullet Type: AccuBond Long Range (Spitzer Point)
- Bullet Base: Boat Tail
- Tip: Gray Polymer Tip
- Core Construction: Bonded Lead Core, Tapered Copper Jacket
- Ballistic Coefficient (G1): 0.530
- Ballistic Coefficient (G7): 0.267
- Sectional Density: 0.264
- Overall Length: 1.370"
- Minimum Impact Velocity for Expansion: 1300 fps
- Quantity: 100 Per Box
What’s Included
- 100 Nosler AccuBond Long Range 6.5mm 129gr component bullets
Frequently Asked Questions
Are these Nosler AccuBond Long Range bullets loaded ammunition or component bullets?
These are component bullets intended for handloading, not loaded, ready-to-fire ammunition. You'll need your own brass, primers, and powder to assemble a finished cartridge. They're sold 100 to a box for reloaders.
What cartridges work with the 6.5mm 129gr AccuBond Long Range?
Any 6.5mm/.264" caliber cartridge can run this bullet, including the 6.5 Creedmoor, 6.5 PRC, 6.5-284 Norma, 260 Remington, and 26 Nosler. It's a popular pick for elk and mule deer hunters who handload. Just work up a safe load for your specific cartridge and rifle.
Why does the ABLR expand at a lower velocity than other Nosler hunting bullets?
The AccuBond Long Range uses a tapered jacket geometry and proprietary bonding process that lets it open up at impact velocities as low as 1300 fps. That's compared to the 1800 fps minimum on most other Nosler hunting bullets. The lower threshold is what keeps it performing on game when your shots stretch way out there.
What twist rate do I need to stabilize this 129gr bullet?
A 1-8" twist barrel will stabilize the 129-grain ABLR without issue, and most modern 6.5mm rifles come with an 8-twist or faster. Faster twists like 1-7.5" or 1-8" are ideal for long-range work. Always confirm your rifle's twist rate before loading.




Reviews
There are no reviews yet.