Description
The Nosler RDF stands for Reduced Drag Factor, and this 6.5mm (.264) 130-grain hollow point boat tail is one of the slickest match bullets you can feed a precision rifle. Nosler engineered the whole RDF line from scratch to chase the highest ballistic coefficients possible, and this one carries a .615 G1 and .307 G7 BC with a sectional density of .266. Translation for the range: a flatter trajectory and less wind drift, which is exactly what you want when the shots stretch out and the breeze picks up.
What Makes the RDF 130gr Different
The two big tricks here are the compound ogive and the long, drag-reducing boat tail. The compound ogive is forgiving when it comes to seating depth, so you've got more room to find a load your barrel likes without chasing the lands obsessively. The boat tail keeps the bullet sleek and stable as velocity bleeds off at distance. Overall length runs 1.333 inches, and there's no cannelure on this one.
Less Prep Time With Nosler RDF Bullets
One of the quiet wins with the RDF line is the meplat. Nosler built these with the smallest, most consistent hollow point meplat of any of their match bullets, which means you can skip the tip pointing and trimming that eats up bench time with a lot of other match projectiles. Pull them out of the box, work up your load, and go. Handloaders running 6.5 Creedmoor, 6.5×55, 6.5 PRC, or similar .264 chamberings tend to love how uniform these run.
Who's Reaching for the 6.5mm RDF
This is a match and target bullet through and through, favored by competition and long-range crowds who want to squeeze every bit of performance out of their rifle. If precision and ballistics are the priority over expansion, the 130-grain RDF is right in its element. Made in the USA, 100 bullets to the box.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 53505
- UPC: 054041535052
- Caliber: 6.5mm (.264)
- Bullet Diameter: 0.264 in
- Bullet Weight: 130 Grain
- Bullet Style: Hollow Point Boat Tail (HPBT)
- Bullet Line: RDF (Reduced Drag Factor)
- Ballistic Coefficient (G1): 0.615
- Ballistic Coefficient (G7): 0.307
- Sectional Density: 0.266
- Overall Length: 1.333 in
- Cannelure: No
- Lead Free: No
- Quantity: 100 Per Box
- Country of Origin: United States
What’s Included
- 100 Nosler RDF 6.5mm (.264) 130gr HPBT match bullets
Frequently Asked Questions
What's the ballistic coefficient on the Nosler RDF 6.5mm 130gr?
This bullet carries a .615 G1 ballistic coefficient and a .307 G7, which is on the high end for a 130-grain 6.5mm projectile. That high BC is what gives you the flatter trajectory and reduced wind drift the RDF line is known for. It's a big reason these are popular with the long-range and competition crowd.
Do I need to trim or point the tips on these RDF bullets?
No, and that's one of the nicest parts. Nosler builds the RDF line with the smallest, most consistent meplat of any of their match bullets, so there's no need to point or trim the tips. You can load them straight out of the box and still get uniform results.
What cartridges can I load the 6.5mm 130gr RDF in?
Any .264 caliber cartridge will take this bullet, including popular ones like 6.5 Creedmoor, 6.5×55 Swedish, 6.5 PRC, and 260 Remington. The 130-grain weight is a versatile choice for match and long-range work in most 6.5mm chamberings. Always work up your load using published reloading data for your specific cartridge.
Is the Nosler RDF 130gr a hunting or target bullet?
This is a match and target bullet designed for precision and ballistics rather than terminal expansion. It shines on paper, steel, and in competition where high BC and tight groups matter most. If you're after a dedicated hunting projectile, Nosler offers other lines built specifically for that job.





Reviews
There are no reviews yet.