Description
The Nosler Partition has been the bullet that other hunting bullets get measured against since 1948, and this 130 grain .270 caliber version is one of the most popular loads you can reload for a .270 Winchester. It uses the same dual-core design that put Nosler on the map: a front core that expands fast on impact and a rear core protected by that signature internal partition wall. The result is a bullet that opens up dependably and still drives deep, which is exactly what you want when the shot matters.
How the Nosler Partition 130gr Does Its Job
The fully tapered copper-alloy jacket is built to rupture right at the thin jacket mouth, then thicken gradually along the bullet's axis to control how it peels open. That design lets the bullet expand reliably whether you catch an animal up close at full velocity or stretch things out where speeds drop off. The integral partition supports the mushroomed front end and keeps the rear core intact, and that rear section hangs onto better than two-thirds of the original bullet weight for the kind of penetration that reaches vitals from tough angles.
Loading the 270 Caliber 130gr Partition Spitzer
These are .277 diameter bullets with a spitzer profile and a G1 ballistic coefficient of 0.416 and sectional density of .242. At 130 grains, this is a classic all-around .270 weight that flies flat, carries energy well at range, and works great on deer, antelope, black bear, and similar game. The box holds 50 component bullets, factory inspected and sealed until you open them. Keep in mind these are component bullets for handloading, not loaded ammunition.
Why Handloaders Keep Reaching for the Partition
For folks who work up their own hunting loads, the Partition is a known quantity. It groups well, it performs the same way shot after shot, and it has a long track record of putting game down cleanly. If you've got a .270 that you trust for everything from whitetails to mountain hunts, this 130 grain Partition is a bullet worth building a load around.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 16322
- UPC: 054041163224
- Bullet Caliber: .270 Caliber (.277)
- Bullet Diameter: .277 in
- Bullet Weight: 130 Grains
- Bullet Style: Partition Spitzer
- Ballistic Coefficient (G1): 0.416
- Sectional Density: .242
- Jacket Material: Copper Alloy
- Core Material: Lead
- Cannelure: No
- Lead Free: No
- Quantity: 50 Per Box
- Recommended Usage: Hunting
What’s Included
- 50 Nosler Partition 270 Caliber .277 130gr Spitzer component bullets
Frequently Asked Questions
Are these Nosler Partition 130gr bullets loaded ammunition?
No, these are component bullets meant for handloading, not loaded cartridges. You'll need your own brass, powder, and primers to build finished rounds. The box includes 50 bullets for reloading your .270 Winchester or other .277 caliber cartridges.
What is the .270 caliber 130gr Partition good for hunting?
This is a true all-around big game weight for the .270. It handles whitetail and mule deer, antelope, black bear, and similar game with reliable expansion and deep penetration. The dual-core Partition design keeps the rear core intact so the bullet drives through on quartering shots.
What diameter are these Partition bullets?
They measure .277 inches, which is correct for .270 caliber cartridges like the .270 Winchester, .270 WSM, and 6.8 Western. Always confirm the diameter matches your specific chambering before loading. The spitzer profile carries a G1 ballistic coefficient of 0.416.
How much weight does the Partition retain after impact?
The rear lead-alloy core is protected by Nosler's integral partition wall, so the bullet holds onto better than two-thirds of its original weight. That retained mass is what gives it the penetration hunters count on. The front core still expands reliably for a good wound channel.




Reviews
There are no reviews yet.