$118.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Norma .338 Lapua Magnum brass gives handloaders a clean, consistent starting point for building precision loads in one of the premier long-range cartridges around. These are new, unprimed cases made by Norma Precision, a Scandinavian outfit that has spent over a century building a name on quality raw materials and tight manufacturing tolerances. If you shoot a .338 Lapua and reload your own, this is brass worth knowing.
The .338 Lapua Magnum itself has roots as a military sniper round developed in the 1980s, built on a strengthened .416 Rigby case necked down to take a .338 bullet. It earned its reputation at extreme long range and has become a favorite among ELR competitors and big-game hunters chasing animals like bear and moose well past the 500 meter mark. Good brass is the backbone of getting the most out of a cartridge like this, and Norma knows its way around the platform.
Norma anneals the case neck to the proper softness, which helps it grip the bullet consistently and resist splitting over time. The hardness increases down the body and reaches its firmest point around the primer pocket, where it matters most for holding primers tight through firing. The flash holes are inspected for a clean, centered, burr-free finish, and the whole case gets a final polish. That combination is what gives Norma its benchrest-level consistency and the uniform case weight and internal volume that precision reloaders chase.
These ship new and unprimed, so you have a blank slate to work up your own recipe. The .338 Lapua uses a large rifle magnum primer and runs at high pressure, so stick to published load data and work up carefully. Many reloaders anneal the necks periodically to extend case life and keep neck tension uniform. Run them through your sizing die, prime, charge, and seat, and you have the foundation for seriously accurate ammunition.
These are new, unprimed brass cases. The .338 Lapua Magnum takes a large rifle magnum primer, so you will need to source those separately along with your powder and bullets. That gives you full control to build your own load from scratch.
This is brand new, never-fired brass straight from Norma Precision. You get fresh cases with annealed necks and factory tolerances, so there is no sorting through mixed headstamps or inspecting for prior wear. Just prep, prime, and load.
Norma tests each production run to a minimum of ten reloading cycles, though real-world case life depends heavily on your load pressure and prep habits. Running milder loads and annealing the necks periodically will help you get more firings out of each case. Hot-rodding near max pressure will shorten that lifespan.
They are two different cartridges, and the brass is not interchangeable. The .338 Lapua Magnum has a longer case and larger base, while the .338 Norma Magnum is a shorter design built to run in standard-length magnum actions. Make sure your rifle is chambered in .338 Lapua Magnum before ordering these cases.
| UPC | 7393923285078 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 10285071 |
| Shipping Weight | 2.542 |
You must be logged in to post a review.
Reviews
There are no reviews yet.