Description
If you're loading 7mm Rem Mag for a bolt gun and want to stretch your brass further while squeezing out better accuracy, this is the die that gets you there. Redding's neck sizing die resizes only the neck of your fired cases and leaves the body and shoulder fire-formed to your chamber. That means less brass worked on every cycle, which translates to cases that last through more reloads and ammo that chambers snug and consistent in the rifle it was fired from.
What the 7mm Rem Mag Neck Sizing Die Actually Does
Standard full-length dies resize the neck, shoulder, and body in one stroke. This one skips all that and focuses on the neck alone. Because the neck is the weakest point on the case, the die includes a decapping rod assembly with a neck expander button so the inside of the neck gets properly sized while the spent primer gets knocked out in the same motion. You end up with correct neck tension for seating bullets and a case that's matched to your chamber. Worth knowing: since the body and shoulder aren't touched, these neck-sized cases should stay with the rifle they were fired in rather than getting swapped between guns of the same caliber.
Redding Build Quality on the 81136 Neck Sizer
Redding doesn't cut corners on machining, and it shows. These dies are made from top-grade alloy steels and turned on Hardinge super-precision lathes that hold extremely tight tolerances. They're heat treated in atmospherically controlled furnaces and hand polished so the case glides in and out smooth. The die uses the universal 7/8"-14 thread, so it drops right into any standard single-stage or turret press you're already running.
This is part of Redding's Series A lineup, which covers their most popular cartridges and keeps the price reasonable without giving up any of the quality. If precision reloading for your 7mm Rem Mag is the goal, neck sizing is one of the simplest ways to tighten things up.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 81136
- UPC: 611760811364
- Cartridge: 7mm Remington Magnum
- Die Style: Neck Sizing Die
- Series: Series A
- Thread Size: 7/8"-14
- Material: Alloy Steel
- Quantity: 1 Die
- Best Use: Bolt Action Rifles
What’s Included
- Neck sizing die
- Decapping rod assembly with neck expander button
Frequently Asked Questions
What's the difference between this neck sizing die and a full-length sizing die?
A full-length die resizes the neck, shoulder, and body of the case in one pass. This neck sizing die only works the neck and leaves the body and shoulder fire-formed to your chamber. That reduces how much the brass gets worked, which helps it last longer and can improve accuracy in the rifle it was fired in.
Can I use neck-sized 7mm Rem Mag brass in a different rifle?
It's best to keep neck-sized cases with the rifle they were fired in. Since the die doesn't resize the shoulder or body, the brass stays matched to that specific chamber. Swapping it into another gun of the same caliber can lead to poor fit and chambering issues.
Does this die fit a standard reloading press?
Yes. It uses the universal 7/8"-14 thread, so it threads directly into any standard single-stage or turret press. No special adapters needed.
Is this the Type S bushing die?
No, this is Redding's conventional Series A neck sizing die with a fixed neck dimension and a decapping rod with expander button. The Type S is a separate bushing-style die that uses interchangeable bushings sold separately. This one is the straightforward, ready-to-run neck sizer.



Reviews
There are no reviews yet.