0
0

Redding Neck Sizing Die 6.5mm Creedmoor (81446)

UPC: 611760814464

$43.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're reloading for a single bolt gun and want to squeeze every bit of accuracy out of your 6.5 Creedmoor brass, a neck sizing die is one of the smartest tools you can have on the bench. This is Redding's standard neck sizing die (part number 81446), built to work only the neck of your fired cases while leaving the body and shoulder exactly as your chamber formed them. Less working of the brass means less stress on the metal, and that pays off in case life and consistency downrange.

What the Redding Neck Sizing Die Actually Does

Unlike a full-length die that resizes the entire case, this one only touches the neck. The case body stays fire-formed to your rifle's chamber, which helps with concentricity and keeps your rounds chambering snug and repeatable. Inside you'll find a decapping rod assembly with a sizing button and decapping pin, so it knocks out the spent primer and expands the neck to proper tension in a single stroke. It's machined from heat-treated steel and made in the USA, which is what you'd expect from Redding gear.

Getting the Most Out of the 6.5 Creedmoor Neck Sizer

Neck sizing shines when your brass is dedicated to one rifle. Because the die leaves the body untouched, cases sized this way aren't meant to be swapped between different guns chambered in the same cartridge, so keep your brass sorted by rifle. Over several firings you may eventually want to bump the shoulder back with a full-length or body die when the bolt starts to close hard, but for building accurate, repeatable ammo in between, this die earns its spot. It uses standard 7/8-14 threads and a #1 shellholder, so it drops right into any common single-stage press.

For precision reloaders, F-Class folks, and anyone who takes their 6.5 Creedmoor loads seriously, this is a straightforward, well-made piece that does exactly one job and does it right.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 81446
  • UPC: 611760814464
  • Caliber: 6.5mm Creedmoor
  • Die Type: Neck Sizing Die (conventional)
  • Case Design: Bottleneck
  • Material: Heat-treated steel
  • Thread: 7/8-14
  • Shellholder: #1
  • Bullet Diameter: 0.264 in
  • Country of Origin: Made in USA

What’s Included

  • Redding 6.5mm Creedmoor neck sizing die
  • Decapping rod assembly with sizing button and decapping pin
  • Plastic storage box
  • Instructions

Frequently Asked Questions

What's the difference between this neck sizing die and a full-length sizing die?

A full-length die resizes the entire case body, shoulder, and neck, while this neck sizing die only works the neck. Leaving the body fire-formed to your chamber reduces how much the brass gets worked, which extends case life and can improve concentricity. Many precision handloaders use a neck die for most firings and only full-length size when the bolt starts to close hard.

Can I use brass sized with this die in a different 6.5 Creedmoor rifle?

It's best not to. Because the die only sizes the neck and leaves the body and shoulder formed to your specific chamber, cases neck sized for one rifle may not chamber properly in another gun of the same caliber. Keep your neck-sized brass dedicated to the rifle it was fired in.

Does the Redding 81446 die deprime the case too?

Yes. It comes with a decapping rod assembly that includes a sizing button and decapping pin, so it removes the spent primer and sets neck tension in a single pass. No separate decapping tool needed.

Will this die fit my press?

It uses standard 7/8-14 threads, so it fits any common single-stage reloading press. You'll want a #1 shellholder for 6.5 Creedmoor, which is the same one used for cartridges in that case head family.

Additional information

UPC

611760814464

Manufacturer

Manufacturer Part Number

81446

Reviews

There are no reviews yet.

Be the first to review “Redding Neck Sizing Die 6.5mm Creedmoor (81446)”