0
0

Redding Neck Sizing Die 22-250 Rem – Standard Series A (81106)

UPC: 611760811067

$43.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 22-250 Rem for a single bolt-action rifle and chasing accuracy, the Redding Neck Sizing Die is one of the most useful tools you can keep on your bench. Instead of working the whole case the way a full-length die does, this one resizes only the neck. That leaves the body and shoulder fire-formed to your chamber, which keeps the brass fit snug and consistent from load to load. Less working of the metal also means your cases last noticeably longer before they need to be retired.

This is Redding's standard Series A neck die, built the same way every Redding die is: machined from high-grade alloy steel on precision lathes that hold the kind of tolerances the company is known for. It carries a decapping rod assembly with a neck expander button, so it knocks the spent primer out and sets your inside neck diameter in the same stroke. It threads into any standard press with 7/8-14 threading, so it drops right into whatever setup you already run.

Why the Redding 22-250 Neck Die Earns a Spot on Your Bench

Neck sizing shines when you're feeding brass back into the same rifle it was fired in. Because the die doesn't touch the shoulder or body, fired cases shouldn't be swapped between different rifles of the same caliber. Keep each lot of brass with its own gun and you'll get the payoff: cleaner chambering, better concentricity, and groups that tend to tighten up over a standard full-length routine.

Getting the Most From This Neck Sizing Die

Many precision handloaders neck size after every firing and only reach for a body die or full-length die when a case starts getting stiff to chamber. That approach stretches your brass life even further. Before first use, wipe off the rust-preventative film Redding ships it with and run a patch through the inside of the die. From there it's a straightforward setup that rewards careful adjustment of the decapping rod and expander.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 81106
  • UPC: 611760811067
  • Caliber: 22-250 Remington
  • Die Type: Neck Sizing Die (Series A, Standard)
  • Number of Dies: 1
  • Thread Size: 7/8-14
  • Material: Alloy Steel
  • Best Suited For: Bolt-action rifles
  • Features: Decapping rod assembly with neck expander button

What’s Included

  • Redding 22-250 Rem Neck Sizing Die (1)
  • Decapping rod assembly with neck expander button

Frequently Asked Questions

What's the difference between this Redding neck sizing die and a full-length die?

A full-length die resizes the entire case, including the body and shoulder, back toward factory spec. This neck sizing die works only the case neck and leaves the body and shoulder fire-formed to your chamber. The result is less stress on the brass, longer case life, and often tighter groups when you shoot the same cases in the same rifle.

Can I use neck-sized 22-250 brass in a different rifle?

Not recommended. Since this die doesn't size the shoulder or body, those dimensions stay matched to the rifle the brass was fired in. Swapping neck-sized cases between different rifles of the same caliber can cause hard or unreliable chambering, so keep each batch of brass paired with its own gun.

Does the Redding 22-250 neck die include a decapping pin and expander?

Yes. The die comes with a decapping rod assembly that holds both the decapping pin and the neck expander button. It removes the spent primer and sets your inside neck diameter in the same press stroke.

Will this die fit my press?

It uses standard 7/8-14 threading, so it fits any common single-stage or turret reloading press on the market. Before first use, clean off the protective film Redding applies for shipping and wipe the inside of the die with a patch and bore solvent.

Additional information

UPC

611760811067

Manufacturer

Manufacturer Part Number

81106

Reviews

There are no reviews yet.

Be the first to review “Redding Neck Sizing Die 22-250 Rem – Standard Series A (81106)”