Description
The NCStar VG167 is a matched front-and-rear flip-up sight set built for 1913 MIL-STD Picatinny rails. You get both sights in one package, so there's no mixing brands or chasing down a second unit to complete your sight picture. The rear sight uses a dual-aperture peep with an adjustable windage knob, while the front runs an adjustable post with an elevation knob, giving you the ability to dial in a real zero rather than just eyeballing it.
What Sets the VG167 Apart
The big draw here is the high-profile height. These sit tall enough to co-witness through a red dot or clear a magnified optic, which makes them a smart pairing for a flattop AR build. Fold them down when you're running glass, flip them up when you need backup irons, and you're covered either way. The flip-up mechanism runs on heavy-duty springs, and the build combines impact-resistant polymer with precision-machined metal parts for the working bits that take the wear.
Mounting the VG167 on Your Rifle
Installation is about as simple as it gets. Both sights clamp onto any standard Picatinny rail with the included hardware, no gunsmithing or special tools required. Keep in mind that for a proper zero, the front and rear need to sit on rails at the same height above the bore, which is standard on most flattop AR-15 uppers. Snug them down, run your adjustments, and confirm on paper before you count on them.
Who the VG167 Is Built For
Think of these as no-nonsense working sights. They're a solid pick for a truck gun, a first AR build, a range plinker, or backup irons on a rifle that lives behind a red dot. The polymer construction keeps weight down and shrugs off corrosion, and the black finish blends right in with modern rifle furniture without snagging on a sling or pack. They won't replace top-shelf steel BUIS on a hard-use duty gun, but for the money they get the job done and keep you in the fight if your optic goes dark.
Key Specifications
- Manufacturer: NcSTAR
- Manufacturer Part Number (MPN): VG167
- UPC: 848754015365
- Style: Flip-Up Back-Up Sight Set (Front and Rear)
- Profile Height: High Profile
- Rail Fit: 1913 MIL-STD Picatinny
- Rear Sight: Dual-aperture peep with adjustable windage knob
- Front Sight: Adjustable post with elevation knob
- Windage Adjustment: Adjustable
- Elevation Adjustment: Adjustable
- Material: Impact-resistant polymer with precision-machined metal parts
- Color / Finish: Black
- Dimensions: 2.0 in L x 1.3 in W x 1.3 in D
What’s Included
- Flip-up front sight
- Flip-up rear sight
- Mounting hardware
Frequently Asked Questions
Will the VG167 co-witness with a red dot?
The high-profile height is designed to line up with most red dots and to clear magnified optics, so co-witnessing is the intended use. Exact results depend on your optic's mounting height and where it sits on the rail. Set them up on paper and confirm your sight picture through the optic before you rely on it.
Do these NCStar sights fold flat to fit under a scope?
These are a high-profile set, so they sit taller than a low-profile BUIS and are built to co-witness or clear optics rather than tuck completely underneath low-mounted glass. If you're running a scope mounted very low, measure your clearance first. For a standard flattop AR with a red dot, they work as intended.
What do I need to install the VG167 sight set?
The set comes with mounting hardware and clamps onto any 1913 MIL-STD Picatinny rail, so no gunsmithing is required. For a proper zero, mount the front and rear on rails at the same height above the bore, which is standard on flattop AR-15 uppers. Windage and elevation are adjustable once mounted.
Are the VG167 sights a good choice for backup irons?
For the price point, they're a practical backup option or a starter iron sight setup for a new build, range gun, or truck gun. The polymer and metal construction keeps them light and corrosion resistant. Just verify your zero and confirm the flip-up mechanism locks up solid for you before trusting them in a serious role.





Reviews
There are no reviews yet.