$16.99
22 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anybody who has assembled an AR lower knows the castle nut is where things get fiddly. This NcSTAR Crows Foot Pro is built to make that job painless. It drops onto the notches of an AR15 or M4 GI-spec castle nut and gives you a solid, no-slip bite so you can snug down your receiver end plate and buffer tube without mangling anything. It runs on standard drive hardware, working with both 1/2" and 3/8" ratchets or a torque wrench you probably already have in the box.
This is more than a one-trick castle nut wrench. It also carries an A2 buffer tube wrench for rifle-length fixed stock tubes, plus a flat blade screwdriver end for driving the A2 buttstock plate screws. So whether you're throwing a collapsible stock on a carbine or building out a classic A2 rifle setup, one tool covers the lower end of the job. That versatility is a big reason folks reach for it over a single-purpose spanner.
The whole thing is machined from steel with a matte black finish, so it holds up to the leverage you throw at it during a stubborn removal or a fresh build. Castle nuts are usually torqued into the 40 ft-lb neighborhood, and a proper crows foot design lets you apply that force cleanly instead of rounding off the notches. Because it accepts a torque wrench through the drive hole, you can hit your spec instead of guessing and hoping.
At right around 6.7 ounces, it's compact enough to live in a range bag or toolbox without taking up much room. It's a natural companion to an armorer's wrench, and for a lot of builders it's the tool that finally makes castle nut work feel routine. If you're putting together your first AR or your fifth, this one earns its spot on the bench.
It seats onto the notches of an AR15 or M4 GI-spec castle nut so you can tighten or loosen it when installing a collapsible stock, end plate, and buffer tube. It also includes an A2 buffer tube wrench for fixed rifle stocks and a flat blade screwdriver for the A2 buttstock plate screws. In short, it covers most of the lower receiver assembly work in one tool.
Yes. The tool is compatible with both 1/2" and 3/8" drives, so you can attach a torque wrench through the drive hole and dial in your spec. Castle nuts are typically torqued in the low 40 ft-lb range, and this lets you hit that number cleanly rather than eyeballing it.
A crows foot design like this one is meant to give solid, positive engagement with the castle nut notches, which reduces the chance of slipping and chewing up the metal. Just make sure it's seated fully before applying force. The steel build handles the leverage needed for both installs and stubborn removals.
It's designed around AR15 and M4 GI-spec castle nuts and A2 buffer tubes, which are the common carbine and rifle standards. Many AR10 pattern rifles use the same castle nut spec, but it's worth confirming your specific build's hardware before you count on it. For standard AR15 lowers, it's a direct fit.
| UPC | 848754015099 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | VTARCFLWRPRO |
| Color | Black |
| Model | |
| Product Type | Tool |
You must be logged in to post a review.
Reviews
There are no reviews yet.