Description
Crush washers get the job done, but nobody enjoys fighting one every time a muzzle device comes off the barrel. Faxon built the MuzzLok system to fix that. Instead of crushing a washer to line everything up, you use the extension nut to fine-tune the length of the device, which adjusts the rotational timing until it sits exactly where you want it. Torque it down to the recommended 20 to 25 foot pounds and you're done. No shims to stack, no guesswork, no starting over because the ports ended up thirty degrees off.
Why the MuzzLok Flash Hider Earns Its Spot
The real payoff shows up down the road. Because there's no crush washer resistance to overcome, you can pull this flash hider off and reinstall it in the field whenever you need to, whether that's for cleaning, swapping devices between builds, or just checking your threads. Anyone who has wrestled a stubborn muzzle device off a barrel with a mangled washer underneath knows exactly why that matters. The ported design does its job on flash suppression while keeping the profile clean and purposeful at the end of your barrel.
Built From Steel, Finished to Last
Faxon machines this one from steel and treats it with a salt bath nitride finish, the same QPQ process they use on their barrels. That gives you a hard, slick, deep black surface that shrugs off carbon and holds up to weather and wear far better than a basic painted or blued finish. The 5/8×24 thread pitch fits threaded 7.62×39 barrels commonly found on AR-platform builds in that caliber, making this a natural pick for finishing out an AR chambered in the classic Soviet round.
Setting Up Your MuzzLok 7.62×39 Device
Installation is straightforward: thread it on, dial the extension nut until the timing is right, then torque to spec. That's the whole process. If you like gear that installs once, comes apart easily, and doesn't leave a crushed washer behind every time, this is a smart way to top off your build.
Key Specifications
- Manufacturer: Faxon Firearms
- Manufacturer Part Number: FFMD762PFHSQPQ
- UPC: 816341025509
- Caliber: 7.62x39mm
- Thread Pitch: 5/8×24 TPI
- Material: Steel
- Finish: Salt Bath Nitride (QPQ), Black
- Type: Ported Flash Hider
- Mounting System: MuzzLok, no crush washer or shims required
- Recommended Torque: 20-25 ft-lbs
What’s Included
- Faxon MuzzLok 7.62×39 Ported Flash Hider
- MuzzLok extension nut (installed on device)
Frequently Asked Questions
Do I need a crush washer or shims to install the Faxon MuzzLok flash hider?
No, and that's the whole point of the design. The MuzzLok extension nut adjusts the overall length of the device, which changes the rotational timing so you can index the ports exactly where you want them. Just dial it in and torque to the recommended 20 to 25 foot pounds.
Can I remove and reinstall this flash hider in the field?
Yes. Since there's no crush washer creating resistance, the device breaks loose and reinstalls without a struggle. That makes cleaning, thread inspection, or moving it between builds much simpler than with a traditional washer setup.
Will this fit my 7.62×39 barrel?
It fits barrels threaded 5/8×24, which is the common pitch on AR-platform 7.62×39 barrels. Check your barrel's thread specs before ordering, since traditional AK-pattern rifles typically use a different metric left-hand thread and won't be compatible.
What finish does the MuzzLok 7.62 flash hider have?
It wears a salt bath nitride finish, also called QPQ, over a steel body. Nitride hardens the surface and adds strong corrosion and wear resistance, plus it makes carbon cleanup easier. It's the same treatment Faxon uses on their well-regarded barrels.




Reviews
There are no reviews yet.