Description
Forward Controls Design built this plate for folks running an Aimpoint ACRO on a SIG M17, M18, or P320 with the factory Delta Point Pro cut. What sets this RSD version apart is the rear sight dovetail machined right into the plate, so you keep a backup iron sight location while your ACRO rides up top. It's a drop-in adapter that mounts the optic directly to the slide, supporting the sight front and rear with threaded posts that tie into the sight-to-mount screws so your dot stays put.
Why the M17/M18 ACRO Plate Is Cut From Steel
Most adapter plates chase light weight with aluminum. Forward Controls went the other direction here, machining this one from 4140 steel and finishing it with a QPQ coating. The thinking is simple: steel plates pair better with steel screws, and in a recoiling pistol application you want reliability and durability over shaving off a fraction of an ounce. The ACRO P1/P2 demands tight tolerances to sit correctly, and this plate is built to the Aimpoint ACRO technical data package to deliver that. It's worth noting this is the same plate offered by TangoDown as the SSM-03, rebranded under the Forward Controls line.
Fitment for Your SIG M17, M18, and P320 Dovetail Plate
This plate works with the MIL-issued M17 and M18, plus the P320 X-Five Legion, Legion Carry, and DP Cut slides. It is not cut for the P320 Pro Cut, P320 sub-compact, AXG, or RX models, so check your slide before ordering. One heads-up from the maker: removing the factory M17/M18 sight plate cover isn't as simple as a Glock MOS, and you'll want to hold the loaded chamber indicator with your finger or a piece of tape while you work, since that little spring is easy to damage.
Installation is straightforward with the included hardware. The screws torque to roughly 25 in-lb, and a dab of the included thread locker keeps everything honest after you've confirmed your sight-to-slide seating.
Key Specifications
- Manufacturer: Forward Controls Design
- Manufacturer Part Number: OPF-M17, ACRO, RSD
- UPC: 686162348015
- Model Compatibility: SIG Sauer P320 M17 / M18
- Optic Fit: Aimpoint ACRO P1/P2
- Material: 4140 Steel
- Finish: QPQ / Black Oxide, Black
- Mount Type: Dovetail (Rear Sight Dovetail)
- Height: 0.240 in
- Width: 0.960 in
- Length: 2.420 in
- Origin: Designed and made in the USA
What’s Included
- M17/M18 ACRO optic mounting plate with rear sight dovetail
- (2) M4 0.7mm x 6mm screws
- T20 key
- Packet of VC-3 thread locker
Frequently Asked Questions
What pistols does this M17/M18 ACRO plate fit?
It's made for the MIL-issued SIG M17 and M18, along with the P320 X-Five Legion, Legion Carry, and DP Cut slides. It is not compatible with the P320 Pro Cut, sub-compact, AXG, or RX models. Double-check your slide's optic cut before ordering so you get a clean fit.
What optic does this plate mount?
This plate is built specifically for the Aimpoint ACRO P1 and P2 red dot sights. It's machined to the Aimpoint ACRO technical data package with tight tolerances so the optic seats correctly and holds zero. It supports the sight front and rear through threaded posts for minimal movement under recoil.
What makes the RSD version different from the standard plate?
The RSD stands for rear sight dovetail. This version machines a dovetail into the plate so you can retain a backup rear iron sight location while running your ACRO, which the standard OPF-M17 ACRO plate does not include. If you want a co-witness or backup option, this is the one to grab.
Why is this plate made from steel instead of aluminum?
Forward Controls uses 4140 steel because steel plates pair better with the steel mounting screws and stand up to the beating a slide-mounted optic takes. The extra weight is negligible on a pistol, and the trade-off buys you durability and reliability. It's also finished with a QPQ coating for added wear and corrosion resistance.





Reviews
There are no reviews yet.