Description
The Midwest Industries R22.5 Offset Rail solves a problem plenty of folks run into once they hang a magnified optic on a rifle: where do you put the backup red dot? Set at 22.5 degrees, or the 1 o'clock position, it tilts your accessory just enough to clear a scope body and turrets without forcing you to roll the gun way over onto its side. That shallower angle is the whole appeal here. Instead of the steep 45-degree tuck, you break your wrist slightly and the dot is right there, which a lot of people find quicker and more comfortable during a transition.
What the R22.5 Offset Rail Actually Mounts
The top surface is a true MIL-STD-1913 Picatinny rail, so it takes whatever you'd normally bolt to a flattop: a mini red dot on its own footprint or riser, a weapon light, a laser, or a set of offset iron sights. The rail runs long, around 5.4 inches, which gives you real room to slide an optic fore and aft to dial in eye position. That extra length also means it plays nice with a wider range of footprints than you'd guess from a quick glance at a photo.
Build and Fit on the R22.5
Midwest Industries machines this one from 6061 aluminum and finishes it in hard-coat anodizing, the same recipe they use across their handguards and mounts. It clamps to any standard Picatinny rail on the top of your handguard or receiver, so it works on an AR-15 or just about any rail-equipped long gun. It's light, right around a couple ounces, so it isn't adding meaningful weight to the front of the gun. Like the rest of the Midwest lineup, it's made in the USA and backed by their lifetime warranty.
If you're running an LPVO or a larger optic and want a secondary sight for close, fast work, this is a clean, no-drama way to get there. Zero it once, leave it, and it's ready whenever you roll the rifle over.
Key Specifications
- Manufacturer: Midwest Industries
- Manufacturer Part Number: MI-R22.5
- UPC: 816537012931
- Offset Angle: 22.5 degrees (1 o'clock)
- Product Type: Offset Mount
- Mounting Interface: MIL-STD-1913 / Picatinny
- Material: 6061 Aluminum
- Finish: Hard-Coat Anodized
- Color: Black
- Length: 5.4 in
- Weight: Approx. 2.2 oz
- Country of Origin: Made in USA
- Warranty: Lifetime
What’s Included
- Midwest Industries R22.5 Offset Rail (1 o'clock)
Frequently Asked Questions
What's the difference between the R22.5 at 1 o'clock and a 45-degree offset mount?
The R22.5 sits at 22.5 degrees, which is a much shallower cant than a standard 45-degree offset. You only have to break your wrist slightly to get behind the sight instead of rolling the whole rifle over onto its side. Plenty of people find the 1 o'clock angle faster and more natural during transitions, while still keeping the optic clear of a scope body and turrets.
Will the R22.5 Offset Rail work with my red dot?
The top is a standard MIL-STD-1913 Picatinny rail, so any red dot that mounts to Picatinny, either directly or on its own footprint plate or riser, will bolt right up. The rail is long enough to give you room to position the optic fore and aft for good eye alignment. Just check your red dot's footprint length so you know where it lands on the rail before you tighten down.
What rifles does the Midwest R22.5 offset rail fit?
It clamps to any standard Picatinny rail, so it works on AR-15s and essentially any rail-equipped long gun with a flattop receiver or a railed handguard. You'll mount it on the top rail and it kicks your accessory off to the 1 o'clock side. As long as you've got Picatinny slots, you're good.
Can I mount more than just a red dot on the R22.5?
Yes. Because it's a true Picatinny surface, you can run a weapon light, a laser, or a set of offset iron sights on it just as easily as an optic. It's built to free up your primary rail space while keeping a secondary accessory aligned and ready.






Reviews
There are no reviews yet.