0
0

Midwest Industries Gen2 2-Piece Drop-In Carbine Quad Rail Handguard 7 in

UPC: 816537010173

$141.95

41 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Midwest Industries Gen2 Two-Piece Drop-In Handguard is the easy button for anyone running an A2 front sight who wants real rail space without tearing their upper apart. This is the carbine-length model, measuring 7 inches, and it replaces those flimsy factory plastic handguards using the same delta ring you already have. Pull the delta ring back, drop the plastic out, hinge the top section in, then the bottom, and you are done. No cutting, no proprietary barrel nut, and no trip to a gunsmith for typical fitment.

Where the stock forend gives you nowhere to hang gear, this one opens up four full MIL-STD 1913 Picatinny rails, each T-marked so you can remount an optic or accessory right back where it was. The top rail runs monolithic style for a continuous mounting surface up top, and the whole thing locks up tight. Feedback from folks running it tends to circle back to the same thing: zero play in the forend once it is on, even paired with quality uppers.

Why the Gen2 Drop-In Handguard Earns Its Keep

It is machined from 6061 aluminum and finished in a black hard coat anodize, so it shrugs off the kind of daily handling and weather that would chew up cheaper parts. At roughly 7.5 ounces it stays light enough that you will not notice a big balance change on the rifle. Folks who priced out name-brand quad rails often land here because the fit and finish hang right with the expensive stuff for a fraction of the fuss.

Rail Space and Sling Options on the MI Gen2

The Gen2 update brings four anti-rotation QD sockets built right into the handguard, so you can run push-button sling swivels without adding a separate mount. Between that and the four rails, you have room for a light, a vertical grip, a bipod, or whatever else your setup calls for. Note that this carbine model is made for round handguard caps, and it plays nice with most gas piston systems too. Made in the USA and backed by a lifetime warranty from Midwest Industries.

Key Specifications

  • Manufacturer: Midwest Industries
  • Manufacturer Part Number: MCTAR-17G2
  • Model: Gen2 Two Piece Drop-In
  • UPC: 816537010173
  • Length: 7 in (Carbine Length)
  • Weight: 7.5 oz
  • Material: 6061 Aluminum
  • Finish: Black Hard Coat Anodized
  • Rail Type: Four MIL-STD 1913 Picatinny, T-marked
  • QD Sockets: Four anti-rotation QD sling sockets
  • Installation: Two-Piece Drop-In, no gunsmith
  • Handguard Cap Fitment: Round handguard caps
  • Compatibility: AR rifles with A2 front sight; most gas piston systems
  • Country of Origin: USA

What’s Included

  • Upper handguard section
  • Lower handguard section
  • Installation hardware
  • Installation instructions

Frequently Asked Questions

Does the Gen2 drop-in handguard require cutting the delta ring?

No. This is the drop-in version, so it installs just like your factory plastic handguards by pulling the delta ring back and swapping the pieces in. Cutting the delta ring is only needed for the free-float models in this lineup, not this one. That is what makes it a no-gunsmith install for typical fitment.

Will this fit my AR with an A2 front sight?

Yes, the carbine-length MCTAR-17G2 is built for AR rifles running an A2 front sight base and a carbine-length gas system. Just make sure your rifle uses round handguard caps, since this model is spec'd for those rather than triangular caps. It also works with most gas piston setups.

Can I mount sling swivels without adding a separate mount?

You can. The Gen2 handguard has four anti-rotation QD sockets machined right in for push-button sling swivels. That means you can attach a sling directly to the handguard and still have all four Picatinny rails open for lights, grips, and optics.

How solid is the lock-up once it's installed?

Users consistently report zero play in the forend after installation, even on quality uppers. The continuous monolithic-style top rail and two-piece clamp design give it a tight, rigid feel. You'll notice the receiver play in your rifle before you feel any wiggle in this handguard.

Additional information

UPC

816537010173

Manufacturer

Manufacturer Part Number

MCTAR-17G2

Color

Black

Length

6

Model

Product Type

Drop-In

Shipping Weight

0.6375

Style

PICATINNY

Reviews

There are no reviews yet.

Be the first to review “Midwest Industries Gen2 2-Piece Drop-In Carbine Quad Rail Handguard 7 in”