0
0

Midwest Industries Combat Rail M-LOK 13.375″ AR-15 Handguard

UPC: 812102032571

$201.95

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Midwest Industries has built a reputation on rails that just work, and the Combat Rail in the 13.375" length is a great example of why. This is a one-piece free-float handguard for the AR-15, machined from 6061 aluminum and given a Type III hard coat anodized finish so it holds up to hard use and rough handling. At a 1.5" outside diameter and 1.3" inside diameter, it runs slim in the hand, which is why folks who like a lean front end keep coming back to this series. Installed weight is right around 10.5 ounces including the barrel nut, so it keeps your build light without feeling flimsy.

What the Combat Rail M-LOK Brings to Your Build

The layout is the real story here. You get seven sides of M-LOK slots running the length of the rail, giving you room to hang lights, hand stops, bipods, and pressure switches wherever they make sense instead of being locked into fixed 90-degree spacing. Up top there's a continuous MIL-STD 1913 Picatinny rail that lines up with your upper for a clean optic or backup sight setup. Two integral anti-rotation QD sling sockets are worked right into the tube, so your sling clips in fast and stays put under recoil.

Getting the 13.375" Combat Rail On Your Rifle

Midwest kept installation refreshingly simple. The system uses a 4140 heat-treated barrel nut and a patented torque plate design, which means there's no timing the barrel nut. You torque it down, slide the handguard over, and lock it in place. Indexing tabs key the rail against the receiver so it won't rotate on you during a string of fire. Every unit ships fully dehorned and deburred, so there are no sharp edges digging into your support hand.

The 13.375" length pairs nicely with mid-length setups and is a popular match for 14.5" barreled builds. It's designed to fit standard forged AR-15 upper receivers, and it's proudly made in the USA with a lifetime warranty behind it.

Key Specifications

  • Manufacturer: Midwest Industries
  • Model: Combat Rail M-LOK
  • Manufacturer Part Number: MI-CRM13.375
  • UPC: 812102032571
  • Length: 13.375 in
  • Installed Weight: 10.5 oz
  • Material: 6061 Aluminum
  • Finish: Type III Hard Coat Anodized, Black
  • Mounting System: M-LOK on 7 sides
  • Top Rail: Continuous MIL-STD 1913 Picatinny
  • Sling Mounts: Two integral anti-rotation QD sockets
  • Outside Diameter: 1.5 in
  • Inside Diameter: 1.3 in
  • Barrel Nut: 4140 heat-treated steel
  • Fit: Standard forged AR-15 upper receivers
  • Country of Origin: USA

What’s Included

  • Combat Rail M-LOK handguard (13.375")
  • 4140 heat-treated barrel nut
  • Barrel nut wrench
  • Patented 4140 heat-treated torque plate
  • 5-slot polymer M-LOK rail section
  • Mounting hardware

Frequently Asked Questions

What length barrel works best with the 13.375" Combat Rail?

This length is a popular pairing with 14.5" barreled AR-15 builds and works well with mid-length gas systems. Just make sure your gas block and any front sight sit far enough forward to clear the inner diameter of the rail. As always, confirm your gas block fits under the 1.3" inside diameter before ordering.

Do I need to time the barrel nut to install the Combat Rail M-LOK?

No, and that's one of the things people appreciate about this system. The Combat Rail uses a torque plate design that removes the need to time the barrel nut, so you torque it down and slide the handguard on. You will need a 1/2-inch drive torque wrench to seat the included barrel nut to the proper AR spec.

Will this Midwest Industries handguard fit my upper receiver?

The Combat Rail is designed to fit standard forged AR-15 upper receivers. Billet uppers vary quite a bit in dimensions, so if you're running a billet upper it's worth checking with that manufacturer first to confirm fit. For most standard forged uppers it's a clean, tight install.

How many mounting options does the Combat Rail give me?

You get M-LOK slots on seven sides of the handguard plus a full-length Picatinny rail up top. That covers lights, hand stops, bipods, pressure pads, and just about any accessory you'd want. The two integral QD sling sockets also let you mount a sling without eating up an M-LOK slot, and the included 5-slot polymer rail section adds a short Picatinny run wherever you need it.

Additional information

UPC

812102032571

Manufacturer

Manufacturer Part Number

MI-CRM13.375

Color

Black

Length

13.375

Model

Product Type

Free Float

Style

M-LOK

Reviews

There are no reviews yet.

Be the first to review “Midwest Industries Combat Rail M-LOK 13.375″ AR-15 Handguard”