Description
The Athlon Midas HMR GEN2 4-24×50 is a second focal plane riflescope built around a wide 6x zoom range that takes you from close-cover shooting all the way out to long-distance target work. Fully multi-coated lenses push plenty of light through the glass for a bright, high-contrast picture, and the illuminated APRS-H2 reticle lights up the center when the sun drops or you're staring into shadowed timber. Riding on a one-piece aircraft-grade aluminum 30mm tube, this one is argon purged, waterproof, and fog proof, so weather and the occasional bump in the field won't knock it off its game.
What the APRS-H2 MIL Reticle Brings to the Table
This is a MIL/MRAD setup through and through, with 0.1 MIL click values on the turrets and a reticle that matches. The APRS-H2 gives you whole and half-MIL subtensions out to 4 MIL, then finer 0.2-MIL and whole-MIL references stretching to 10 MIL vertically, with windage marks running out to 6 MIL. Because it sits in the second focal plane, the reticle stays the same visual size no matter where you set the magnification, which a lot of hunters prefer for a clean, uncluttered sight picture. Holdovers stay true at full 24x where the MIL math lines up.
Dialing and Tracking on the Midas HMR GEN2
The exposed elevation turret runs 10 MIL per revolution and features Athlon's Precision Zero Stop, letting you return to your set zero with a firm, positive stop every time. Clicks are tactile and audible, and the side parallax knob dials from 10 yards to infinity so you can keep things sharp and shift-free at any range. Set your zero, lock in the stop, and you've got a dependable system for dialing corrections and coming right back home.
With roughly 3.93 inches of eye relief and a 21-ounce weight, the Midas HMR GEN2 balances well on bolt guns and precision rigs alike. It runs a CR-2032 battery for the reticle illumination and comes backed by Athlon's reputation for punching above its price class on glass and tracking.
Key Specifications
- Manufacturer: Athlon Optics
- Manufacturer Part Number: 213060
- UPC: 813869026148
- Model: Midas HMR GEN2
- Magnification: 4-24x
- Objective Lens: 50mm
- Tube Diameter: 30mm
- Focal Plane: Second Focal Plane (SFP)
- Reticle: APRS-H2 SFP IR MIL (Illuminated)
- Click Value: 0.1 MIL
- Turret Travel: 10 MIL per revolution
- Eye Relief: 3.93"
- Field of View @ 100 yds: 23.5 – 4.7 ft
- Parallax Adjustment: 10 yds to infinity
- Illumination Battery: CR-2032
- Weight: 21 oz
What’s Included
- Athlon Midas HMR GEN2 4-24×50 riflescope
- Lens caps
- Lens cloth
- CR-2032 battery
- Instruction manual
Frequently Asked Questions
Is the Athlon Midas HMR GEN2 4-24×50 a first or second focal plane scope?
It's a second focal plane (SFP) scope, so the APRS-H2 reticle stays the same visual size no matter what magnification you're running. That keeps the sight picture clean and uncluttered at low power, which many hunters prefer. Just keep in mind the reticle subtensions are calibrated to be accurate at the top end of the magnification range.
Does this Midas HMR scope have a zero stop?
Yes. It features Athlon's Precision Zero Stop on the exposed elevation turret, which lets you dial corrections and return to your established zero with a firm, positive stop. You set it after zeroing your rifle, and from there the turret won't rotate below your zero point.
Is the reticle MIL or MOA, and what are the turret clicks?
This model runs the APRS-H2 reticle in MIL/MRAD with 0.1 MIL click values, so the reticle and turrets speak the same language. The elevation turret gives you 10 MIL of travel per revolution. That matched system makes dialing and holding corrections straightforward.
Will the Midas HMR GEN2 hold up to weather and recoil?
It's built on a one-piece aircraft-grade aluminum 30mm tube and is argon purged, waterproof, and fog proof. The argon purging resists internal fogging in temperature swings, and the sealed construction handles rain and the occasional drop. It's rated to take hard recoil without losing zero.





Reviews
There are no reviews yet.