0
0

Forster Ultra Micrometer Seater Die – 6×47 Lapua (U00036)

UPC: 757253999277

$118.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Ultra Micrometer Seater Die for 6×47 Lapua takes the guesswork out of seating depth. Instead of nudging a lock nut and hoping for the best, you dial in your exact setting on a micrometer head that adjusts in either direction down to .0005 inch. For anyone chasing tight groups out of a 6×47 Lapua, that kind of repeatability is the difference between a flyer and a clean cluster on paper.

What Sets the 6×47 Lapua Ultra Seater Apart

The heart of this die is Forster's caliber-specific sliding chamber. Rather than supporting only the case rim like a lot of seaters, it cradles the entire outside diameter of the sized case and holds the bullet, case, and seating stem in the same close-fitting chamber through the whole stroke. That co-axial alignment is what keeps runout low and sends bullets in straight, which matters a lot for a precision cartridge like the 6×47.

Micrometer Control That Remembers Your Loads

The micrometer carries index marks at .001 inch increments with bright white gradations that are easy to read under bench lighting. Once you find the seating depth your rifle likes, you can jot down the number and return to it any time, which makes bouncing between bullet weights or load workups painless. It's a non-crimping design, so it's built for folks who want to experiment with different bullets and fine-tune toward the lands.

Bullet Compatibility for the 6×47 Lapua Handloader

The seating stem is shaped to contact the bullet on the ogive rather than the tip, with enough clearance to run ballistic tips and most very low drag (VLD) bullets without swapping parts. Reloaders working everything from lighter match bullets up to heavier high-BC projectiles in 6×47 Lapua report the stem handles them well. If you run a Forster Co-Ax press you won't need a shellholder, and in other presses it uses the shellholder your press maker recommends.

Key Specifications

  • Manufacturer: Forster Products
  • Caliber: 6×47 Lapua
  • Die Type: Ultra Micrometer Bullet Seating Die
  • Crimp Style: Non-crimping
  • Micrometer Adjustment: Adjustable to .0005 inch
  • Gradation Marks: .001 inch increments
  • Material: Steel
  • Bullet Compatibility: Standard, ballistic tip, and most VLD bullets
  • Manufacturer Part Number: U00036
  • UPC: 757253999277
  • Shipping Weight: 0.6 lb

What’s Included

  • Forster Ultra Micrometer Seater Die (6×47 Lapua)
  • Lock ring
  • Storage box

Frequently Asked Questions

What seating depth adjustment does the Ultra Micrometer Seater Die offer?

The micrometer head adjusts in either direction and is easily set down to .0005 inch, with index marks clearly stamped at .001 inch increments. The bright white gradations make it simple to read at the bench. Once you find a setting your rifle shoots well, you can record the number and dial right back to it later.

Will this die work with VLD bullets in 6×47 Lapua?

Yes. The seating stem contacts the bullet on the ogive rather than the tip and has enough clearance to run ballistic tips and most very low drag (VLD) bullets without buying a separate stem. Handloaders using the 6×47 die commonly run everything from lighter match bullets to heavier high-BC projectiles with no issues.

Does the Forster Ultra Seater die crimp the case?

No, this is a non-crimping style seater die. It's designed to seat bullets with excellent alignment and consistency, which is ideal for precision load development. If you want a crimp, you would add that step with a separate crimp die.

Do I need a shellholder to use this Forster die?

It depends on your press. If you're running a Forster Co-Ax press, no shellholder is required since those presses don't use one. In any other brand of press, use the shellholder recommended by that press manufacturer.

Additional information

UPC

757253999277

Manufacturer

Manufacturer Part Number

U00036

Shipping Weight

0.6

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die – 6×47 Lapua (U00036)”