Description
If you've ever fought with a standard taper crimp die, trying to sneak up on the perfect setting a quarter-turn at a time, this Redding die fixes that headache. Built for .308 Winchester, it uses a top-mounted knurled micrometer barrel that puts your adjustments right at your fingertips. Instead of loosening the lock ring and chasing a coarse 7/8-14 thread, you just turn the micrometer and go.
What the Micrometer Head on the 308 Crimp Die Does for You
The micrometer gives you roughly plus or minus .100 inches of adjustment in clean .001 inch increments, with white hash marks that make it easy to read exactly where you're set. That matters more than folks realize, because variations in case length and wall thickness both throw off a crimp setting. Being able to nudge it a thousandth at a time, on the fly, means you can account for brass that isn't perfectly uniform and still land on a repeatable crimp every time. It's especially handy if you're running a progressive press with tight space up top where there's no room to mess around with a lock ring.
Why a Taper Crimp Die for .308 Loads
A taper crimp works differently than a roll crimp. It gently squeezes tighter and tighter to hold the bullet in place without working the case mouth as hard, and it doesn't change the overall length of the loaded round. That gives you added case tension to keep bullets from backing out or walking under recoil and feeding, which is a nice insurance policy for semi-autos and anyone loading for consistency. The die body is machined to tight tolerances with a close-fitting lead-in, so your finished rounds stay concentric coming out.
This is the .308 Winchester model (also fits 7.62x51mm NATO brass), item number 31155, and it's a non-reversible rifle die made in the USA. It threads into any standard 7/8-14 press, so it drops right into the setup you already own.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 31155
- UPC: 611760311550
- Cartridge: .308 Winchester / 7.62x51mm NATO
- Die Type: Micrometer Adjustable Taper Crimp Die
- Adjustment Range: Approximately +/- .100" in .001" increments
- Adjustment Style: Top-adjusting knurled micrometer barrel
- Thread Size: 7/8"-14
- Reversible Sleeve: No (rifle dies are non-reversible)
- Press Compatibility: Single stage, turret, and progressive
- Country of Origin: USA
What’s Included
- Redding Micro-Adjustable Taper Crimp Die (.308 Winchester, 31155)
Frequently Asked Questions
What's the advantage of the micrometer head on this Redding taper crimp die?
The micrometer sits on top of the die so you can make adjustments without touching the lock ring or spinning the whole die body. It gives about plus or minus .100 inches of travel in .001 inch increments, with white hash marks so you can read your exact setting. That lets you fine-tune your crimp on the fly and return to a known setting anytime.
Will this die work for 7.62x51mm NATO brass too?
Yes. The .308 Winchester and 7.62x51mm NATO share the same case dimensions for crimping purposes, so this die handles both. It's the 31155 model built specifically for that case.
What's the difference between a taper crimp and a roll crimp for .308?
A taper crimp gradually squeezes the case mouth tighter to grip the bullet without rolling the brass over into a cannelure, and it doesn't change the cartridge's overall length. It's a good choice for bullets without a crimp groove and for loads where you want added case tension to prevent bullet movement under feeding and recoil. A roll crimp works the case mouth harder and is typically used with cannelured bullets.
Does this Redding die fit a standard reloading press?
It does. The die uses the standard 7/8"-14 thread, so it screws into single stage, turret, and progressive presses. The top-adjusting micrometer design is especially useful on progressives where there isn't much room to work with a lock ring.





Reviews
There are no reviews yet.