Description
Slapping a red dot on a pump or semi-auto scattergun used to mean drilling, tapping, or living with a wobbly clamp-on rail. This Meprolight plate skips all of that. It's a direct-mount adapter that lets any pistol optic built on the Trijicon RMR footprint sit low and tight on top of a Remington 870 or 1100 receiver, so you get a clean sight picture without piling on extra height or hardware.
What the Meprolight Optics Plate Is Made Of
Meprolight cut this plate from 6061-T6 aluminum and finished it with a matte black Type 2 hard anodized coating. That combination gives you a light part that shrugs off recoil, scuffs, and weather without adding meaningful weight up top. The machining is done to keep the optic seated flat against the receiver, which matters a lot when you're dealing with the kind of shove a 12 gauge hands out shot after shot.
Why the RMR Footprint Matters
The RMR footprint is the most common mounting pattern in the pistol optic world, first set by the Trijicon RMR back in 2009 and adopted by a long list of makers since. That works in your favor here. Popular dots like the Holosun 507C and 407C, the Swampfox Justice, Trijicon's own RMR Type 2, and plenty of enclosed-emitter options all share this pattern, so you're not locked into one brand. Whether you're setting up a home-defense 870 or a turkey gun and want faster target acquisition than a bead sight can give you, this plate opens the door.
Getting the Meprolight Plate on Your Shotgun
Installation is straightforward because Meprolight includes model-specific screws with Loctite already applied, so you're not hunting for the right hardware or thread locker. A common gotcha with RMR-footprint setups is screw length, and having the correct screws in the box takes that guesswork off the table. Torque them down, mount your optic, confirm zero at the range, and you're running.
Key Specifications
- Manufacturer: Meprolight
- Manufacturer Part Number: 901141043
- Model: Optics Plate
- UPC: 810013525175
- Mount Type: RMR Footprint
- Compatibility: Remington 870 / 1100
- Material: 6061-T6 Aluminum
- Finish: Matte Black Type 2 Hard Anodized
- Construction: CNC Machined
- Color: Black
What’s Included
- Meprolight RMR footprint optics plate
- Model-specific mounting screws with Loctite pre-applied
Frequently Asked Questions
Which optics fit the Meprolight RMR footprint plate?
Any pistol red dot built on the Trijicon RMR footprint will bolt right up to this plate. That covers a wide field including the Holosun 507C and 407C, Swampfox Justice, Trijicon RMR Type 2, and many enclosed-emitter dots. Just double-check that your optic specifically lists the RMR footprint and not the smaller RMSc or RMRcc pattern, since those won't line up.
Will this plate fit my Remington shotgun?
This plate is cut to fit the Remington 870 and 1100 receivers. It mounts directly to the top of the receiver for a solid optic connection, so it's a great fit if you're building out a defensive or hunting setup on one of those platforms. Meprolight makes separate plates for other shotguns like the Benelli, Beretta, and Mossberg lines, so grab the one matched to your gun.
Do I need extra hardware to install the Meprolight optics plate?
No, the plate ships with model-specific screws and Loctite already applied, so you have what you need to get it on the gun. Screw length is the usual trip-up point with RMR-footprint mounts, and having the correct screws included takes that worry away. Torque everything to spec, mount your optic, and confirm your zero before heading out.
Is the plate tough enough to handle 12 gauge recoil?
It's machined from 6061-T6 aluminum with a hard anodized finish, which is built to take repeated shotgun recoil without loosening or wearing out. The direct receiver-to-plate mounting keeps the optic sitting flat and low, which helps it hold zero. Pair it with a quality dot and thread locker on the optic screws and you've got a durable setup.





Reviews
There are no reviews yet.