Description
If you already run a MEC 600 Jr. Mark 5 single-stage press, this is the clean way to add another gauge without buying a whole second machine. MEC has built these shotshell presses for every kind of loader, from folks just getting their feet wet to people who have been cranking out shells for decades, and these conversion kits let one press do double duty. This set carries the UPC 098489014489 and part number 845216, which ties to the 16 gauge configuration.
What the MEC 600 Jr. Mark 5 Die Set Changes
The kit bolts onto your existing Mark 5 and resets it to size, deprime, reprime, drop powder and shot, seat the wad, and crimp a different hull. It comes with the full run of factory parts: a K.O. bushing, resize ring, deprime punch, reprime punch, wad guide, rammer tube, star crimp head, cam crimp assembly, shell holder, and drop tube. Printed instructions are in the box too, so you can see how each piece indexes back onto the press.
Picking the Right Gauge for Your Mark 5 Setup
MEC offers these 600 Jr. Mark 5 die sets across 10, 12, 16, 20, and 28 gauge along with .410 Bore, so there is a match for whatever you want your press to run next. Just make sure the set matches the shell you plan to load and that your press is the 600 Jr. Mark 5 version, since these parts are cut for that frame and will not drop into older or different MEC models.
For anyone shooting a less common hull like 16 gauge, where factory ammo gets pricey and hard to find on the shelf, converting a press you already own is one of the better reasons to roll your own. The parts are the same American-made components MEC puts on its complete presses, so fit and feel stay consistent with what you are used to.
Key Specifications
- Manufacturer: MEC (Mayville Engineering Co.)
- Fits: MEC 600 Jr. Mark 5 presses only
- Gauge: 16 Gauge
- Function: Gauge conversion die set
- Country of Manufacture: United States
- Manufacturer Part Number: 845216
- UPC: 098489014489
- Shipping Weight: 0.9625 lbs
What’s Included
- K.O. bushing
- Resize ring
- Deprime punch
- Reprime punch
- Wad guide
- Rammer tube
- Star crimp head
- Cam crimp assembly
- Shell holder
- Drop tube
- Instructions
Frequently Asked Questions
Will this die set fit my MEC press?
This set is cut specifically for the MEC 600 Jr. Mark 5 press and nothing else. If your press is an older 600 Jr. or a different MEC model, these parts will not line up correctly. Double check that your frame is the Mark 5 version before ordering.
What gauge does the MEC 600 Jr. Mark 5 die set with part number 845216 cover?
This particular kit, UPC 098489014489 and MPN 845216, is set up for 16 gauge. MEC also makes these conversion sets in 10, 12, 20, and 28 gauge plus .410 Bore if you need a different shell.
Does the kit come with everything needed to switch gauges?
Yes. It ships with the full set of factory parts including the K.O. bushing, resize ring, deprime and reprime punches, wad guide, rammer tube, star crimp head, cam crimp assembly, shell holder, and drop tube, plus instructions. You will still supply your own hulls, powder, shot, wads, and primers to actually load shells.
Is this hard to install on the press?
Swapping gauges on a 600 Jr. Mark 5 is a manageable job if you follow the included instructions and work through it one part at a time. Most loaders who are comfortable with their press can make the change at the bench without special tools. Give yourself a little time the first time around to get everything indexed right.




Reviews
There are no reviews yet.