0
0

MDT Field Stock Chassis System for Ruger 10/22 – ODG

UPC: 990482707262

$299.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The MDT Field Stock keeps the classic rifle silhouette a lot of 10/22 owners grew up with, but swaps the factory plastic for a purpose built chassis that actually helps you shoot better. Underneath the traditionally shaped, warm-to-the-touch polymer shell sits a 6061 aluminum core that gives your action a solid, consistent home instead of the flex you get from a stock factory stock. In Olive Drab Green, it looks right at home in the field without losing any of the precision upgrades that made MDT a name in the chassis world.

Field Stock Chassis Bedding and Barrel Setup

At the heart of this chassis is an aluminum V-block bedding system that clamps your action into place with real repeatable contact, rather than relying on wood or plastic that shifts over time and rounds fired. The barrel rides free-floating through the forend, so nothing is pressing against it to throw off your point of impact from shot to shot. Installation is genuinely simple too. Pull your action out of the factory stock, drop it into the Field Stock, and tighten down two screws. No inletting, no sanding, no trip to a gunsmith.

Dialing In Fit on the Field Stock

Every shooter's build is different, and this chassis accounts for that with a length of pull that adjusts from 13.5 inches out to 14.5 inches using included spacers, plus a cheek riser that raises and lowers with a tool-less thumbwheel. Get your eye lined up behind a scope the same way every single time and target acquisition gets noticeably faster.

Mounting Options on the Field Stock Forend

The M-LOK forend along with front and rear sling swivel studs means you can hang a bipod, sling, or ARCA rail without hunting down adapters. One thing worth knowing up front: this particular 10/22 version runs on factory Ruger rimfire magazines like the BX-1 and BX-25, not AICS pattern mags, so there's no need to buy anything extra to get shooting once it's installed.

Key Specifications

  • Manufacturer: MDT
  • Manufacturer Part Number: 109542ODG
  • UPC: 990482707262
  • Fits: Ruger 10/22 (Right Hand)
  • Color: Olive Drab Green (ODG)
  • Construction: 6061 aluminum core with overmolded high-strength polymer
  • Overall Length: 32.22 inches
  • Weight: 3.1 lbs
  • Length of Pull: Adjustable 13.5 in to 14.5 in via 1/4 in spacers
  • Cheek Riser: Tool-less adjustable, max height 1.370 in
  • Forend: M-LOK compatible
  • Barrel Fit: Free-floating
  • Bedding: Aluminum V-block
  • Magazine Compatibility: Factory Ruger 10/22 rimfire magazines
  • Sling Studs: Included, front and rear

What’s Included

  • MDT Field Stock Chassis (ODG) for Ruger 10/22
  • Length of pull spacer set
  • Front and rear sling swivel studs
  • Magazine latch/release (user-installed during setup)

Frequently Asked Questions

Will my factory Ruger 10/22 magazines work in the MDT Field Stock?

Yes, this particular Field Stock for the 10/22 is set up to run standard factory Ruger rimfire magazines like the BX-1 and BX-25. Some Field Stock listings mention AICS compatibility, but that spec applies to other rifle platforms in the lineup, not this 10/22 version, so there is no need to buy special magazines.

Is installing the Field Stock chassis complicated?

Not really. You remove your barreled action from the factory stock, drop it into the Field Stock, and tighten down two screws to secure it. A few owners note the fit is tight going in and the magazine release needs to be snapped in during setup, but no permanent modifications or gunsmithing are required.

Can I adjust the length of pull and cheek height on this stock?

Yes, the buttstock length of pull adjusts from 13.5 inches to 14.5 inches using the included spacers, and the cheek riser raises and lowers with a tool-less thumbwheel. This lets you get consistent eye alignment behind a scope every time you shoulder the rifle.

How much heavier is this than the factory Ruger 10/22 stock?

The Field Stock weighs about 3.1 pounds, which is noticeably more than the factory polymer stock due to the aluminum bedding block inside it. That extra weight comes with real benefits though, since the added rigidity helps tame flex and supports more consistent accuracy.

Additional information

UPC

990482707262

Manufacturer

Manufacturer Part Number

109542ODG

Reviews

There are no reviews yet.

Be the first to review “MDT Field Stock Chassis System for Ruger 10/22 – ODG”