Description
Maxim Defense built their CQB stocks around a proprietary buffer system, and this H3 combo is the heavy end of that lineup. Coming in at 4.85 oz, it swaps into a Maxim CQB stock or PDW brace and gives you a way to dial in how your rifle runs. The extra mass slows the bolt carrier down as it travels back, which takes the sharp edge off recoil and cuts down on the bolt bounce you get with lighter setups. If your build runs hot or wears a can, that added weight is exactly what you want.
Why the H3 Weight Makes a Difference
Buffer weight is one of the easiest ways to change how an AR feels and behaves, and the H3 sits at the top of Maxim's standard buffer options. Heavier mass means longer dwell time, which helps with extraction reliability on over-gassed or suppressed guns. It also cleans up ejection patterns, so if your brass has been flying erratically or your action feels violent, stepping up to the H3 often settles things down. This combo pairs the tungsten-weighted buffer with a matched spring so the two work together instead of fighting each other.
Built to Fit the Maxim CQB System
This is not a mil-spec carbine buffer, so it is worth being clear: the CQB Buffer & Spring is engineered specifically for Maxim Defense CQB stocks and their PDW braces. It will not drop into a standard AR receiver extension, and it will not work in the Maxim PDW brace that uses a standard AR-15 buffer assembly. If you already run a Maxim CQB stock and want to fine-tune it, this is the piece that lets you do it. You keep your existing bolt carrier group and just change out the buffer and spring.
Maxim offers this system in several weights, from a standard 3.3 oz all the way up through H1, H2, and this H3, plus a dedicated pistol-caliber option. Going with the H3 is the move for anyone chasing softer recoil, cleaner cycling, and better manners out of a compact, suppressed, or high-pressure build.
Key Specifications
- Manufacturer: Maxim Defense Industries
- Model: CQB Buffer & Spring, H3
- MPN: MXM-47567
- UPC: 680017475673
- Type: Buffer and Spring Combination
- Weight Class: H3
- Buffer Weight: 4.85 oz
- Buffer Material: Tungsten / Stainless Steel
- Finish: Natural
- Platform: AR-15
- Compatibility: Maxim Defense CQB stock systems
What’s Included
- Maxim Defense CQB buffer (H3, 4.85 oz)
- Matched CQB buffer spring
Frequently Asked Questions
Will the Maxim CQB Buffer & Spring H3 work in a standard AR-15 buffer tube?
No. This buffer and spring set is engineered specifically for Maxim Defense CQB stock systems and their compatible braces. It is not a drop-in for a standard mil-spec receiver extension, so you will want to confirm you are running a Maxim CQB stock before ordering.
What is the difference between the H3 and the lighter Maxim CQB buffers?
The H3 is the heaviest of Maxim's standard buffer options at 4.85 oz, compared to the 3.3 oz standard, 4 oz H1, and H2. That extra weight slows the bolt carrier down more, which reduces felt recoil and increases dwell time. It is the go-to choice for over-gassed or suppressed builds where a lighter buffer feels too snappy.
Is the H3 a good choice for a suppressed setup?
Yes. Running a suppressor adds back pressure and speeds up the action, and the heavier H3 mass helps counter that by slowing bolt velocity and giving the system more time to work. Many people move up to the H3 specifically to tame a suppressed CQB build and clean up ejection.
Do I need to change my bolt carrier group to use this buffer?
No. This is a straightforward buffer and spring swap within a Maxim CQB stock, so you keep your existing bolt carrier group. Just make sure your firearm is unloaded, pull the old buffer and spring, and drop the H3 combo in its place.




Reviews
There are no reviews yet.