Description
The MPA BA Bolt Action Mount is MasterPiece Arms' answer to the one real headache of precision rifle setups: keeping your expensive glass locked down and holding zero through recoil, barricades, and plenty of handling. This version is built for 34mm scope tubes with a 1.125" ring height and 0 MOA cant, making it a natural fit for a long list of popular long-range optics running big objectives up to 56mm.
What sets this mount apart is the rail interface. It uses a NATO-spec system that pulls the mount down onto the top of the Picatinny rail rather than pinching it from the sides, and with over 3.5 inches of contact that works out to roughly 200% more rail engagement than a lot of competing mounts. Multiple locking lugs along the bottom of the interface deliver absolute return-to-zero, so you can move the optic and mount between rifles and only need minor windage and elevation touch-ups.
How the MPA BA Mount Earns Its Keep
This thing is machined to tight tolerances, with bore roundness and cylindricity held within .0002". The horizontal split-ring design and that wide clamping surface mean your scope sits true and stays put. It's precision machined from 6061 T6 aluminum and finished in a hard coat T3 Mil-Spec anodize, so it shrugs off field abuse and holds up over the long haul.
Accessory Options on the BA Series Mount
There's a practical touch here that precision folks appreciate. The mount body has four accessory mounting locations on the left and right sides, front and back, drilled and tapped on 20mm hole spacing with M4 threads. That lets you add turret guards, dope cards, bubble levels, and other Unimount-compatible accessories right onto the mount where you can reach them.
For setup, MasterPiece Arms calls for 15 to 20 inch-pounds on the top caps and 60 inch-pounds on the cross bolt. Get your torque right, check your eye relief, and this mount will hold its zero trip after trip. It's backed by a lifetime warranty.
Key Specifications
- Model: MPA BA Bolt Action Mount
- Manufacturer: MasterPiece Arms
- MPN: BAMOUNT-34-1125
- UPC: 866803040175
- Tube Diameter: 34mm
- Mount Height: 1.125"
- Cant: 0 MOA
- Mount Type: Picatinny Rail
- Pieces: 1-Piece
- Material: 6061 T6 Aluminum
- Finish: Hard Coat T3 Mil-Spec Anodize, Black Matte
- Rail Interface: Over 3.5"
- Accessory Hole Spacing: 20mm, M4 Thread
- Max Objective: Up to 56mm
- Length: 4.76"
- Weight: 6.8 oz
What’s Included
- MPA BA Bolt Action Mount (1-piece, 34mm, 1.125" height, 0 MOA)
- Ring caps with mounting hardware
Frequently Asked Questions
What optics work with the MPA BA Mount 34mm 1.125" model?
This mount is built for scopes with a 34mm main tube, and the 1.125" ring height suits optics where the erector housing to main tube measurement runs about 0.210" or shorter. Popular matches include the Vortex Razor Gen II HD 4.5-27, NightForce ATACR 5-25, and Vortex Strike Eagle 5-25×56. It handles large objectives up to 56mm, so most long-range scopes clear without issue.
Does the MPA BA Mount really hold zero when moving between rifles?
Yes. The multiple locking lugs on the bottom of the rail interface provide absolute return-to-zero, which is the whole point of this design. You can pull the optic and mount off one rifle and put it on another with only minor windage and elevation adjustments needed to re-confirm.
What are the torque specs for the MPA BA scope mount?
MasterPiece Arms calls for 15 to 20 inch-pounds on the top ring caps and 60 inch-pounds on the cross bolt that clamps to the rail. A good inch-pound torque wrench makes this easy to get right. Proper torque is what keeps the scope from shifting and protects your zero.
Can I add accessories to the BA Series mount body?
You can. The mount has four accessory locations on the left and right sides, front and rear, drilled and tapped on 20mm spacing with M4 threads. That lets you attach turret guards, dope cards, bubble levels, and other Unimount-compatible gear directly to the mount.





Reviews
There are no reviews yet.