Description
A MEC reloader is a workhorse, but like any machine that cycles thousands of times, it runs best when it's clean and properly lubed. This maintenance kit from MEC pulls together the specific tools you need to service your press, so you're not improvising with whatever's in the junk drawer. It was built with MEC's progressive reloaders in mind, which is exactly where regular upkeep pays off the most.
Inside the pack you get MEC's anti-seize collet lubricant, a pick, a brush, a column spring lifter, and a closure nut wrench. The lubricant is formulated for the resizing collet and moving parts, which cuts down on the effort it takes to run the handle and helps extend the working life of your tool. The pick is there for digging shot and debris out of the collet or the indents in the shell carrier, and the brush handles general cleaning, excess oil, and spreading lube where you want it.
Why the MEC Maintenance Kit Earns Its Spot on the Bench
The standout piece for a lot of folks is the column spring lifter. Anyone who has fought to get that heavy column spring up and out of the way knows the headache. This tool lifts it and holds it there so you can get at the carrier and carrier bushing to clean, lube, or swap parts without a wrestling match. The closure nut wrench rounds things out for adjusting your closer on the 8567 Grabber and 9000 Series machines.
Getting the Most From Your MEC Reloader Maintenance Kit
The collet lubricant goes on thin, applied to the outer fingers of the collet with the brush or a swab, and reapplied as the machine tells you it's due. Steady resizing effort and clean cycling are the payoff. The kit was designed primarily around the progressive lineup, so Grabber and 9000 Series owners will get the most out of every piece here. It's the kind of small investment that keeps a good press feeling new season after season.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 8948
- UPC: 098489028608
- Type: Reloading Press Maintenance Kit
- Ammunition Type: Shotshell
- Designed For: MEC Shotshell Reloaders (progressive lineup)
- Country of Origin: United States
- Length: 10.9 in
What’s Included
- Anti-Seize Collet Lubricant
- Pick
- Brush
- Column Spring Lifter
- Closure Nut Wrench
- Instructions
Frequently Asked Questions
What does the MEC Maintenance Kit include?
The kit comes with MEC's anti-seize collet lubricant, a pick, a brush, a column spring lifter, and a closure nut wrench. Instructions are included so you know where each tool is meant to be used. Together they cover the cleaning and lubrication points on a MEC press.
Which MEC reloaders is this maintenance kit built for?
It was primarily designed around MEC's progressive reloaders, with the collet wrench suited to the adjustable closer on the 8567 Grabber and 9000 Series machines. The column spring lifter is especially handy on the 9000H. Fit can vary by model, so it's worth confirming the spring lifter matches your specific press before servicing.
What is the column spring lifter for?
It lifts the heavy column spring and holds it in the raised position so you can access the carrier and carrier bushing underneath. That lets you clean, lubricate, or replace those parts without fighting the spring tension by hand. It's the piece most owners point to as the real time saver in the kit.
How often should I use the anti-seize lubricant on my MEC?
Apply a thin layer to the outer fingers of the collet whenever the machine starts to feel like it's taking extra effort to cycle, then reapply as needed. A small brush or cotton swab works well for getting it on cleanly. Keeping the collet lubed improves loading performance and helps your press last longer.





Reviews
There are no reviews yet.