Description
If you've been shooting standard .38 Special and want more power without stepping up to a .357, the Magtech 38N gives you the best of both worlds. This is a +P load, meaning it packs higher pressure and velocity than standard rounds, but it still stays within safe operating limits for revolvers rated to handle +P ammunition. You're looking at 886 feet per second from the muzzle and 275 foot-pounds of energy, which puts it in a useful middle ground between full-power and basic training loads.
What Makes the 38N Stand Out
The 158-grain Semi-Jacketed Soft Point bullet is the real story here. That SJSP design gives you controlled expansion on impact without the feeding issues that can come with hollow points in some revolver cylinders. The soft lead core is partially locked by the jacket, so you get reliable, uniform expansion while maintaining deeper penetration than you'd get from a standard hollow point. The flat nose profile is safe for revolvers and makes smooth feeding a given.
Built for Serious Practice
Each cartridge goes into reloadable brass with a Small Pistol Primer that's non-corrosive. That means you can reload these cases if you're into handloading, and they'll clean up easy in your gun. The ballistics are consistent enough that if you're serious about training with what you might carry, this is a solid platform. Magtech manufactures these in Brazil with quality control that's earned them a reputation for reliable ammunition at decent prices.
A Note on Your Firearm
Because this is a +P load, make sure your revolver is rated for it before you start shooting. Most modern .38 Special revolvers can handle +P just fine, but older aluminum-frame guns or vintage models might be worth checking first. Once you confirm your gun is rated for +P, the recoil stays manageable enough that you won't develop a flinch, even in compact revolvers.
Key Specifications
- Caliber: .38 Special +P
- Bullet Weight: 158 grains
- Bullet Type: Semi-Jacketed Soft Point (SJSP)
- Muzzle Velocity: 886 fps
- Muzzle Energy: 275 ft-lbs
- Rounds Per Box: 50
- Case Material: Brass (reloadable)
- Primer Type: Small Pistol Primer #1-1/2 (non-corrosive)
- Ballistic Coefficient: 0.172
- Manufacturer Part Number: 38N
- UPC: 754908170616
- Manufacturer: Magtech Ammunition
What’s Included
- 50 rounds of Magtech 38N ammunition
Frequently Asked Questions
Can I use the 38N in any .38 Special revolver?
The 38N is a +P load, so you need a revolver specifically rated for +P ammunition. Most modern .38 Special revolvers handle +P just fine, but check your manual or contact the manufacturer if you're unsure about an older or vintage gun. Once you confirm it's rated for +P, you're good to go.
How does the 38N compare to standard .38 Special loads?
The +P rating means you get higher velocity and energy than standard loads, coming in around 886 fps and 275 foot-pounds compared to about 755 fps and 200 foot-pounds for typical standard-pressure .38 Special. You're getting noticeably more performance without the excessive recoil of a .357 Magnum from a snub-nose revolver.
Is the SJSP bullet safe for my revolver's cylinder?
Absolutely. The flat nose design makes the SJSP round safe for most revolver cylinders. The soft point won't cause feeding problems like some hollow points can, and the design gives you reliable expansion without the complications of more traditional hollow point designs.
Can I reload these cases?
Yes. Each cartridge uses reloadable brass with a Boxer primer, making these cases ideal if you handload. The brass quality from Magtech is solid, and you can reload them multiple times before they wear out.





Reviews
There are no reviews yet.